Supply the British Soundcraft SOUNDCRAFTGB8-40RW569740 Road Professional Mixer

Soundcraft GB8 using the MH3 and MH4 interface, and dual-mode design that provides for group or auxiliary output fader control function can be used to FOH or monitor other places. Also it includes other effects, including the former Graham Blyth's GB30 mic preamps and EQ, a 1kHz oscillator and a meter bridge with three LED meter that can mimic the effects of emission VU meter. GB8 Four mute groups, you can mute several channels simultaneously, while another unique setting of the Record and Alternate stereo outputs from the limiting easier to create a stereo recording of the mix. In addition, GB8 an output matrix with 11 input channels and four output channels, can provide 8 group buses and left, right and center (mono) outputs. Although the GB8 design is very traditional, but it has some unique mechanical properties. The rugged steel chassis has a sloping rear connector panel, you configure from the front, immediately after the control panel. The entire power supply has connectivity options interface for connecting external blocking the PSU. In order to ensure the stability of the product under adverse conditions, pay attention to careful mechanical construction of the product. All input modules being constructed with individual vertically mounted on the PCB, and the steel chassis front panel with individually nutted table. Like with GB4, GB8 only combines the popular look MH4, MH3 and LX7ii mixer, but retains the look and quality of material size family with a strong color: Width: Weight: 12 channels 730mm (28.73 ";) 20kg ( 44.1 pounds) 16-channel 842 mm (33.13 ";) 22kg (48.5 lbs) 24-channel 1065 mm (41.93";) 27kg (59.5 lbs) 32-channel 1300 mm (51.17 ";) 32kg (70.5 lbs) 40-channel 1523 mm ( 59.96 ";) 37kg (81.6 lbs) input and output impedance: Microphone Input: 2KΩ line inputs and stereo return: 10 KΩ Input Channel Insert return: EQ insert is 5 KΩ, the other for 3KΩ mix, group, aux and direct Output: 150Ω insert send: 75Ω Recommended Headphone Impedance: 50Ω-600Ω high-pass filter (mono input): 18dB / octave, 100Hz EQ (single channel): High Frequency: 13 kHz, + / - 15dB, 2 order high-pass filter high-frequency: 550Hz-1.3Hz, +/- 15dB, Q = 1.5 low-IF bandpass filter: 80Hz -1.9kH, +/- 15dB, Q = 1.5 low-frequency band-pass filter: 80Hz, + / -15dB, 2-order low-pass filter level meter: Input channels: 4 segment single three-color LED light-emitting diode level meter output channels: 7 12 segment tri-color LED light-emitting diode level meter Power consumption: AC 50/60 Hz , 85V-270V AC universal input power consumption: less than 150W Operating conditions: temperature range: -10 ℃ ~ + 30 ℃ Relative Humidity: 0% to 80%