Glass tempering furnace price Landglass Glass Tempering Furnace Glass Tempering Furnace FIG latest offer

The latest offer _ Glass Tempering Furnace Tempering Furnace _ Landglass glass tempering furnace is provided by Randy machines. We are Luoyang Randy Glass Machinery Co., Ltd. (www.landglass.com) in: Luoyang specializes in: steel furnace, glass tempering furnace, forced convection tempering furnace, convection oven, double chamber oven temperature by heating for 2.2 uneven Control Measures thermal deformation caused by (1) the temperature difference for the upper and lower surfaces, when the glass is bent upward, indicating that the glass surface temperature. Surface temperature should be reduced, while maintaining the overall glass heating temperature constant, an appropriate increase in surface temperature; when the glass is bent downward, indicating that the surface temperature is higher than the surface temperature, the surface temperature should be lower due to lower, while increasing the surface temperature. If at the time of adjusting the temperature, tempered steel yield and quality are affected, respectively, an appropriate extension of the heating time or reduce the heating time. (2) For the deformation temperature difference caused by the presence of glass in the middle and edge, if the glass showing saddle-shaped, indicating poor insulation or furnace temperature setpoint lower edge, you need to adjust the temperature set point edge; when When the glass bottom of the pot shape rendering, if due to historical reasons, can temporarily laying glass, the first air furnace operation, the furnace temperature is evenly distributed and then poorly; if the temperature setting issue, the need to adjust the temperature setting parameters, so furnace temperature distribution. (3) for the random uneven temperature, you need timely maintenance equipment, to avoid adverse device status, often to clean up broken glass near the temperature sensor, the temperature sensor is accurate to feel the temperature of the furnace, while the topsheet is to avoid more furnace in the same state stacked. Randy installation personnel to install equipment in Iraq, the way to its factory View equipment operation, that Randy made its first piece of equipment 24 hours a day in three shifts of production, has continued for several years, from the incessant, The second device is the production of two classes a day, we persuade them to pay attention to good maintenance of equipment, he fell disagree, also took to check product quality, and come up to the amount of glass the size of a ruler, a number significantly exceeded monolithic glass equipment designed for the production of nominal size, see people alarmed Randy's eyes, his beaming, proud of it.