Mechanism charcoal, blue sky licensing mechanism charcoal equipment, energy efficient mechanism charcoal

Blue sky licensing mechanism charcoal production, tend to be some problems because of improper operation of the operator or routine maintenance is not in place. In the mechanism of charcoal production, the most common problem is the phenomenon back to gas. The reason is because the excessive moisture in the material, the generated gas can not be completely removed from the front of the device, it is from the feed opening squeezed out, so be sure to dry the raw material before proceeding. After the produce is fed back to the gas shortage phenomenon, we should increase the height of the propeller leaves, increased feed rate. Of course, the heating temperature is too high will produce insufficient supply should also ibid similar conditions and reduce temperature or to increase the height of the propeller leaves. Automatic mechanism charcoal. Therefore, the device appears to be running in a timely manner to solve any problem, do not dragging its feet on equipment hazard, affecting production. Mechanism charcoal suppliers. 4.11 better energy-efficient mechanism charcoal equipment will appear in this or that problem after a period of time, such as the heating coil is not working and so easy to state. When the heating coil rods machine at work, has not been heated to a very red state, too slow, then a boot temperature plummeted, and then there will be jammed and so on. Many people do not know what effect the heating coil in the sky in the licensing mechanism charcoal, charcoal mechanism is the heating coil forming mechanism of carbon rod surface hardening, after the hardening mechanism of carbon can increase yield and quality, so will increase production efficiency mechanism charcoal production line mechanism charcoal production line using three heating coil, to meet production needs, this can be a good way to make charcoal once hardened skin, thus faster upgrade charcoal machine production efficiency and production quality. Which mechanism charcoal. 4.12 mechanism charcoal equipment in production, and sometimes there will be too much ash, the result is too much ash which reason do you have? Professional mechanism charcoal factory Gongyi City, blue sky Machinery Plant to answer your questions. 1, ash mechanism charcoal equipment at work when the temperature is too high during the charring caused by too high, this phenomenon is the emergence of solutions: if high temperature carbonization process is bound to make carbon elements hydrogen and oxygen contact escape, so that carbon on are relatively light, and ash will not escape, that the relative increase in charcoal ash. Mechanism charcoal prices. 2, ash due to the lack of clean material caused by too much reason for this phenomenon is the solution: the primary way to deal with an aspect of the problem is the manipulation of materials delivery process, try to ensure that no material was in the process of transporting pollution ; together material origin have good control method. Which mechanism charcoal. 4.12