Glass tempering furnace continuous glass tempering furnace _ _ _ Randy Glass Tempering Furnace Landglass

[] Glass tempering furnace, continuous glass tempering furnace, glass tempering furnace Landglass provided by Randy machines. Randy Luoyang Glass Machinery Co., Ltd. (www.landglass.com) is located in the 12th Luoyang City, Henan Luoyang King City Road, Contact: Mr. Qin glass deformation mainly from two aspects, the first issue is the precision roller track, followed by uneven stress problem. 1.2 due to the heating caused by the thermal deformation temperature unevenness exists 1.2.1 glass surface temperature difference during the heating up and down, when the glass is delivered to the heated rollers, the lower surface of the glass in contact with the roller, the heating roller directly conducting manner glass by heat exchange, on the surface of the glass on the surface of the glass is heated by way of heat radiation, the heat transfer rate is higher than the upper surface of the lower surface of the heat transfer rate, when the thermal equilibrium is not taken when the auxiliary heating, the surface temperature of the glass lower than the temperature of the lower surface, and at the start of heating the glass is a typical elastomer, the thermal expansion coefficient and relatively high glass (linear expansion coefficient of the glass was 9 × 10 / .C), since the surface temperature is higher than the temperature of the upper surface , the expansion rate is higher than the upper surface of the lower surface of the glass that is bent upward from the glass surrounding Alice roller to form an intermediate glass is heated, and is only the middle roller support, when the glass is further heated in contact with the roller position First to reach the softening temperature and subjected to the full weight of the glass, the middle of the glass will occur "floating" deformed, resulting in thinning of the site and asked the roller prints and even optical distortion. On the other hand when all the glass is heated to the softening temperature of the glass flattened, but the temperature difference did not disappear with the temperature difference between the glass is uniformly cooled to room temperature, the contraction is greater than the cold surface of the glass heat shrinkage to form the heat curved surface. Jam Imen Safety Glass is an Iranian company through the use of steel equipment Randy grew up in the company. Opened at the beginning, the company leases the one vertical steel furnace and the plant began in glass business. In the company boss Mr. Jam at Shanghai exhibition, the body hides $ 3,000 went to Luoyang Randy company, as a deposit to Sam, the request for the design and production of a flat steel furnace, the two sides signed a contract for the sale, the company immediately arrange for Randy production, after timely delivery and installation. Less than two years, the customer payback after he bought the plant, and from Randy customized with a bi-bending steel furnace. At present the factory area quadrupled. Whenever Randy's staff, Mr. Jam always smiling, but also embrace, but also according to their relatives and friends greeted each other the way the pro side, Randy equipment quality and service are very satisfied.