LDBB curved two-way steel furnace, LDBE curved two-way steel furnaces, steel furnace Landglass

[Steel furnace] _LD-BB-way curved steel furnace steel furnace _ Landglass provided by Randy machines. Steel furnace, Landglass steel furnace, LD-BE-way curved steel furnace is usually successful cleanup order roller Luoyang Randy Glass Machinery Co., Ltd. (www.landglass.com) 2014 has been newly upgraded launched as follows: with a coarse cloth stove and a stage of the roller. 2. Wipe with a damp cheesecloth stove and a stage of the roller. 3, using gauze wipe roller, roller perception with both hands surface. a. If smooth, then wipe again with a coarse cloth attached to the furnace. b. If not smooth or some fragments visible, start the fourth step. 4, with a minimum of water and non-abrasive pad to wash roller. 5, the use of coarse cloth towel roller and a hand to perceive roller surface. a. If smooth again with coarse cloth after loading into the furnace. b. If roughness or nodules visible, repeat step 6 before starting the steps 4 and 5. 6. If there are still rough and gnarled, with fine sandpaper, filing, or abrasives to remove localized spots. 7, using a damp cloth to wipe the roller or with a minimum amount of water to clean the roller. 8, using gauze wipe roller, and a hand to perceive roller surface. a. If smooth, wipe again with a coarse cloth, and then loaded into a furnace. b. If the remains are still rough or paraganglioma, repeat step 6. c. Once the roller surface is smooth and dry, always wipe again with a coarse cloth roller and then installed into the oven. First, Frosted glass Frosted tempered glass (frosted glass) is a homogeneous rough surface with sandblast glass or hydrofluoric acid etching glass is formed. Frosting technology can also be combined with screen printing technology to produce a variety of different patterns and designs on the glass surface for decoration, produce hazy, noble, elegant decorative effect. Frosted glass and steel-sided, we need to put into the furnace Frosted face up to avoid damage to the roller. Since Frosting surface is matte, to heat absorption enhancement, Frosted glass surface temperature rises quickly, the production time, to set the upper temperature lower than the lower part, holding the furnace temperature uniformity. In addition, quenching the windward gate height slightly lower, but also help produce high-quality glass Frosting. Frosted glass and steel double-sided, glass will have some friction roller damage, it should be avoided producing double-sided Frosted glass. If you really need to produce, it can adjust the line speed of the glass movement is small, and 5% to 10% shorter heating time. After production, with waste glass (must be clean) friction dressing roller.