T-plug charging charging adapter cable adapter cable XT60

A few years, the rapid development of electric models, the desire for energy is growing, getting better and better discharge performance of the battery, electronic speed current capability to withstand higher and higher, ordinary T-type plug has not fully meet the mold of the faithful demand, XT60 plug can be well under enormous energy output, based on the use of different plug metal component, the current tolerance can vary from between 50A-120A, basically meet the needs of most high-power electric model. 2, plug and easier maintenance believe we have the experience, T-type plug most troubling is that plug too difficult, due to the need to withstand a large current, along with T plug tightness to be very good, which at the expense of model plug plug resistance, battery run out, need to be removed when the replacement, XT60 plug on the show superiority, because it is combined with a cylindrical plug, plug a lot easier, but there is no current tolerance receive change, and even improved tolerance. 3, safe and convenient T-type plug we usually use, are using the power cord after welding is completed shrink tube to act as insulation pads on the positive and negative power supply, but we strongly swap T interpolation, it is very easy accidentally shrink tube to pull down, when a short circuit, then if the power will be very dangerous, XT60 do not have this trouble, it is easy to plug, finger rearing places on the plug, not the cable, and welding There is also a local point circular groove, heat shrink tubing can drill the tank, after thermal welding point for better protection and more secure.