Hydrothermal synthesis reactor

 Hydrothermal synthesis reactor is a chemical commonly used laboratory mini-reactor, the reaction can be used to synthesize small doses; can use cans in acid or alkali and high temperature and pressure sealed environment to achieve rapid digestion of insoluble material purposes. Hydrothermal synthesis reactor is a closed container can decompose insoluble substances. It can be used for atomic absorption spectroscopy and plasma emission and other dissolved sample pre-treatment analysis; also be used for synthesis of small doses; can use cans in acid or alkali and high temperature and pressure sealed environment to achieve the purpose of rapid digestion of insoluble substance . Do sample preparation in chemical analysis of gas, liquid, plasma spectroscopy mass spectrometry, atomic absorption and atomic fluorescence method. Is the determination of trace elements and trace elements sample digestion assistant. In the determination of heavy metals lead, copper, cadmium, zinc, calcium, manganese, iron and other applications, it can be used as a high temperature corrosion of high purity high pressure reaction vessel, as well as organic synthesis, hydrothermal synthesis, crystal growth or sample digestion terms of extraction. Before sample digestion of heavy metals, pesticide residues, food, mud, earth, fish, organic matter and so on. Therefore, in the research and production of petrochemical, biomedical, materials science, geochemistry, environmental science, food science, commodity inspection and other sectors are widely used. Hydrothermal synthesis reactor characteristics 1, anti corrosion, no harmful substances spill, reduce pollution and the use of safety. 2, heating, after the boost, fast non-destructive sample dissolution under normal conditions and are difficult to dissolve the sample containing volatile elements. 3, beautiful appearance, reasonable structure, simple operation, short analysis time, reliable data. 4, inside a Teflon liner, generate care, acid and alkali. 5, to replace the platinum crucible solve handling problems Dissolving trace element analysis of high purity alumina. High pressure digestion vessel used in the oven, also known as sample dissolution, pressure melting bombs, hydrothermal synthesis reactor, the digestion tank, PTFE high-pressure tank, is the determination of trace elements and trace elements sample digestion assistant. Sample preparation digestion of heavy metals, pesticide residues, food, mud, earth, fish, organic matter and so on. Hydrothermal synthesis reactor operation method ◆ The reaction was poured into Teflon liner or PPL bush, and to ensure feeding coefficient is less than 0.8. ◆ Make sure the kettle under the gasket in the correct position (convex side down), and then into the bush or PPL Teflon liner and the gasket, first tighten the tank cover, then screw the kettle lid knob tight. ◆ The hydrothermal synthesis reactor heater placed in accordance with the provisions of the heating rate was raised to the desired reaction temperature. (Less than a predetermined safe temperature). ◆ When confirmation of intra-abdominal temperature below the boiling point solvents reaction system can only open the tank lid subsequent operations. Completion of the reaction will be when its cool, but also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life. ◆ After confirmation of intra-abdominal temperature below the boiling point solvents reaction system, first screw the kettle lid knob is released and the kettle lid open. ◆ hydrothermal synthesis reactor after each use to clean in time, in order to avoid corrosion. Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to their bruised. Hydrothermal synthesis reactor Wholesale Price consulting invited http://www.huateyq.com/huateyiqi-ParentList-955010/ hydrothermal synthesis reactor Store more product information all in http://www.chem17.com/st280755