Steam heater has a silencer features

Scroll steam heater muffler made of stainless steel, structure as above right. Core wall inclined hole eccentric, inclined form steam into the liquid from an oblique hole in the pipe from the cyclone discharge, promote water spiraling rotation within the housing. On the one hand the steam can be quickly uniformly dissolved in water, heat loss; on the other hand, the rotary steam flow can better absorb the kinetic energy, eliminate noise; meanwhile, continues to lead the heated water from the surface of the shell hole, drive heating surrounding the flow of water, heating the entire tank (pool) of water. Silencer Heater Features: 1, energy efficient: thermal efficiency up to 99%. The heater enables direct steam quickly and evenly dissolved in the liquid, and the vapor pressure of the liquid to be heated even if only 0.04Mpa, steam still better to join the liquid to be heated, so little heat loss, high thermal efficiency. 2, hot water temperature is high: higher temperatures can be obtained using the hot water heater, the maximum heating temperature, open container of 98 ℃, pressure vessels up to 150 ℃ heater maximum working pressure is 1.6Mpa.. 3, vibration, low noise: help to improve the environment, compared with the old-fashioned flower tubular heater, etc., due to the use of the heater inside the cyclone muffler structure, noise below 50db, vibration greatly reduced. As can be seen from the bottom right on the noise curve, vapor pressure, the higher the heating temperature, but less noise. 4, the total investment is low: heat steam directly into the tank, you can save water by pumping station equipment, saving investment. 5, operation, maintenance is simple: water, steam separately controlled, so that the remaining water in the tank can be repeated heating, easy temperature control. Heater small size, light weight, easy maintenance.