Huizhou bag company | bag factory in Huizhou | Huizhou melt filter bags

Supply Huizhou bag companies bag factory in Huizhou, Huizhou melt filter bags | Aoxing specializing in the production of hot melt filter bags | welding filter bags | filter bags Aprons | Wi filter bags | liquid filter bags | filter bags of food | beverage filter bag | Water filter bags | oil filter bags | PP filter bag | PE filter bags | oil removal filter bags | Chemical filter bags | oil filter bags | filter bags Guangzhou soymilk Aoxing filtration equipment Limited - Contact: Fang Zhen Kun 15817170885 http: / /www.ax-filter.com fusion welding filter bags, the main material use special liquid media. To come forward with a special filter filtrate are singeing treatment, both effectively prevent fibers from the filtrate contamination, but also to avoid the traditional roll-over treatment caused pore blockage and shorten the life of the liquid filter bags. All raw materials are the white, without any special dyeing process in full compliance with environmental standards, but also because of the three-dimensional needle felt filter layer, making the liquid flow through needle felt, the particles will remain as deep bed filtration mechanism in liquid filter bags the inner wall surface and deep, solid or colloidal particles with high collection efficiency. The bottom of the melt filter bags, side and collar ring connection method, have to melt the welding method avoids the pinhole filter bags sewn seam produced, adapted to the field of higher precision; precision wireless seam filter bags with the use of digital bit multi-spot welding equipment to ensure that every point of welding remain the most solid and consistent. To ensure that the filter bag is not affected by other production materials to ensure that each filter bag material consistency. Material: Polyester (PE), polypropylene (PP), nylon (MO) Country: five seam, full-fusion welding filter precision (micron um): 1,3,5,10,15,20,25, 50,75,100,150,200 operating temperature (℃): polyester (PE) 130 (momentary 180), polypropylene (PO) 90 (instantaneous 110), nylon (MO) 180 filter bag fixed orifice ring material: stainless steel ring , galvanized steel ring, plastic ring (polyester / polypropylene) standard filter bag size: 1 Bag -Φ180 × 430mm (Φ7 × 17 inches) on the 2nd bags -Φ180 × 820mm (Φ7 × 32 inches) on the 3rd Bag - Φ106 × 230mm (Φ4 × 9 inches) 4 bags -Φ106 × 380mm (Φ4 × 15 inches) on the 5th bags -Φ152 × 510mm (Φ6 × 20 inches) in addition to standard products, the company also based on customer requirements for the production of liquid filter bags, air filter bag series. A warm welcome to inquire.