Jiangmen bag company | Jiangmen bag manufacturers | Jiangmen resin filter bag

Jiangmen supply bag company, Jiangmen bag manufacturers, Jiangmen resin filter bags | Aoxing professional manufacturer of resin filter bags | grease filter bags | ink filter bags | liquid filter bags | Chemical filter bags | filter bags plating | water filter bags | nonwoven cloth filter bag | filter bag | Oil filter bags | diesel filter bag | sauce filter bags | filter bags electrophoretic paint | cleaning filter bags | filter bags Guangzhou Aoxing ink filtration equipment Limited - Contact: Fang Zhen Kun 15817170885 http: // www.ax-filter.com filter bag material used with the industry's highest standards of foreign manufacturers or the same manufacturer-owned factory in the domestic production of special liquid filter material. To come forward with a special filter filtrate are singeing treatment, both effectively prevent fibers from the filtrate contamination, but also to avoid the traditional roll over treatment caused pore blockage and reduced bag life. All raw materials are the white, without any special dyeing process in full compliance with environmental standards, but also because of the three-dimensional needle felt filter layer, making the liquid flow through the filter bags, the particles will remain as deep bed filtration mechanism in the inner wall of the liquid filter bag surface and deep, solid or colloidal particles with high collection efficiency. Needle felt uniform thickness and stable opening rate and the full strength of the bag efficiency and stability, the use of a longer time. Five lines most closely sewing needle, to ensure that every liquid filter bags can achieve the best filtering protection. Use a wide range applicable to all industries liquid filtration. Material: Polyester (PE), polypropylene (PP), nylon (MO) Country: five seam, full-fusion welding filter precision (micron um): 1,3,5,10,15,20,25, 50,75,100,150,200 operating temperature (℃): polyester (PE) 130 (momentary 180), polypropylene (PO) 90 (instantaneous 110), nylon (MO) 180 filter bag fixed orifice ring material: stainless steel ring , galvanized steel ring, plastic ring (polyester / polypropylene) standard filter bag size: 1 Bag -Φ180 × 430mm (Φ7 × 17 inches) on the 2nd bags -Φ180 × 820mm (Φ7 × 32 inches) on the 3rd Bag - Φ106 × 230mm (Φ4 × 9 inches) 4 bags -Φ106 × 380mm (Φ4 × 15 inches) on the 5th bags -Φ152 × 510mm (Φ6 × 20 inches) in addition to standard products, the company also based on customer requirements for the production of liquid filter bags, air filter bag series. A warm welcome to inquire.