KFX-I type fast cement separator price

 KFX-I type fast cement separator features: 1. Dual cone tower dust, mud and water do not make contact with the cylinder wall, preventing the clogging of sticky ash caused. 2. sprinkler head mounted outside the dust zone, so the dust will not be in contact with the nozzle, to solve the water jet nozzle clogging due to not affect the suction effect problems. 3.KFX-I type fast cement separator using the twin towers mounted directly on the kiln of the two chimneys, flue gas line to avoid detours caused by resistance, so the low resistance of the device, without actually induces the wind does not produce smoke phenomenon . 4. KFX-I type fast cement dust separator using a large amount of water, prompting the circulating water rate, so the lower the temperature, to resolve pipe scale, reduce water evaporation, and the effect of dust is not good and so on. 5. Full use of recycled water, definitely not go down the kiln emissions and waste water. 6. After collecting effluent can be quickly separated from water through mud and mud separator. Isolated burnt porridge like mud discharged to the biaxial continuous mixer, and without any mud equipment. Mud recovered 100% recycled, no secondary pollution discharged to the ground and made the issue of Yang. 7. KFX-I type fast cement splitter low running costs, power consumption is only 9KW.