MC type pulse single bag filter processing and sales

 Features: MC-type pulse single bag filter is to absorb foreign advanced technology similar products on improved design of baghouse. The pulse jet bag filter using high pressure (0.5-0.7Mpa) high flow valve by one pulse jet dust bag technology, compared with other domestic stand-alone, with cleaning kinetic energy, high efficiency. And small size, light weight, simple structure, easy to install, easy to maintain (external filter type), widely used in building materials, metallurgy, mining, chemical, coal, non-metallic mineral ultra-fine powder processing and other sectors of the dusty gas purification processing system, is the ideal equipment environmental dust. How it works: dust and gas from the inlet port into the ash bucket, or flanged into the bag through the open chamber, dusty gas through the dust bag filter for the purification of gas into the clean gas chamber, and then the net gas chamber exhaust port , from the fan discharge. Plot attached to the outer surface of the dust bag, and the increasing resistance of the pouch dust rising, for the resistance of the device does not exceed 1200Pa, bag filter can continue to work, you need to periodically clear the dust on the filter bag, cleaning is the timing sequence started by the PLC program controller pulse valve, the air bag compressed air (0.5-0.7Mpa) injected from the injection tube (called primary air) via a venturi tube several times in a wind-induced ambient air (known as di secondary air) into the bag in an instant rapid expansion of the bag, along with a reverse air flow forces and shake off the dust, to achieve the purpose of cleaning.