ZC-ⅡⅢ mechanical rotary cleaning flat bag filter

The dust accessories Garden physical structure adopted by force, good antiknock performance, compact structure, the use of high pressure air cleaning dust, from air conditions, the use of automatic control of cleaning dust resistance energy savings extend bag use, cold region indoor installation in other regions can be installed outdoors, and can be widely used in many sectors of mechanical, foundry, mining, metallurgy, building materials, food and chemical industry. Users should pay attention to the selection of high temperature, high concentrations of fine dust particles should be used A-type, whereas the appropriate type B, such as the concentration is greater than 15 g / m3 level should be added in front of the cyclone. (For the discretion of crude nuclear dust relax). Structure and working principle: it consists of the following four components :( see the basic structure of FIG. 1). The box: Includes dust cover, rotate Uncovery means, clean room for bags into the hole, the observation hole, outlet. 2. In box: including flower plate, bag, bag frame bag guide mouth, the filter chamber cylinder, air intakes, the Confucian. 3. Lower box: includes positioning a support frame, hopper, star cinder valve seat. 4. Anti-hair cleaning agencies include: arm, vents, sub-loop cleaning mechanism, circulating air duct, anti-hair tube, cleaning fan speed reduction mechanism arm. Anti-hair arm is driven by a gear unit is placed on the roof, floor cleaning fan installed, connected for three or four laps arrangement bag, jib set up sub-loop cleaning device through the center tube with spiral arms. Star cinder valve, reducer and motor, cleaning fan, arm reduction mechanism and circulating air piping, etc. are accessories. According to user requirements may be able to match, platforms, ladders, not shown in the series of assembly drawing, and cleaning their fan base and circulating air duct should be considered site-specific design and installation.