_ Standard test sieve test sieve sieve test _ _ _ slap ultrasonic test sieve sieve sieve analysis _ standard

Product Overview HY-200 machine is a standard shaker vibration motor as vibration source, vibration motor driven vibrating screen machine base vibration, then transfer to a place on the base of standard test sieves through the base, the standard screening test that is less than the test sieves screen surface mesh material particles into the lower screening test sieve, so layers of screening, leaving only the material within each test sieve of the same size. To achieve the separation of different particle size and particle size was determined the composition of this material. The test sieve material can effectively screening, grading, filtering purposes. Standard screen Application I produced is mainly used for test rooms, laboratories, materials selection, screening, and other inspection departments to granular, granular structure of powder materials, liquid type solids content and the amount of debris in precise sieve min, filter, measure the series test sieves with low noise, standard sieve, sieve, filter the sample efficiency, high precision, is widely used in research and production of metallurgical, cement, chemicals, pharmaceuticals, building materials, geology, defense and other sectors , laboratory, quality control room. Help First, according to the subject material and the appropriate criteria for determining the criteria to choose screening tools. ? Second, the standard screening tools by aperture descending, from bottom to top to pallets stacked seat by grooves or screw on standard screening tools for positioning. ? Third, the subject material into the top of the standard screening tools in, (or with a standard sieve with a lid) and then set in the silk screening column head pressed against standard screening tools, tighten the wire nut column pressing standard screening tools. (Note: to force consensus on both sides, and then lock the screw lock.) Fourth, the timer switch in position corresponding need (note reading timer instructions, set a different setting time is not the same) then? Turn the power switch, test sieve began to work. ? Five, standard test sieve after work stopped, unscrew the wire column nut, remove the first screening, careful removal of standard screening tools. ? Six, cut off the power.