Laboratory test sieve, sieve test, test screening machine

Use and characteristics: HH-200 Standard sieve analysis is a powder grade, liquid filtration as one of the standard test sieves; for laboratory, quality control room of the particles, powder particle size analysis of structural precision, Liquid solids content Test and analysis of the amount of debris. With low noise, high efficiency. Use STMOTOR (Mita) new dedicated power generator, multi-product high-frequency vibration, high screening samples; standard sieve to ensure that sample analysis with high accuracy; electronic delay device can be set with the same kind of material as required screening time, Analysis of data to ensure a sample correctly, the hard error to a minimum, in order to make the criteria for judging the quality of products. Usage: First, according to the subject material and the appropriate criteria for determining the standard screening tools to choose. Second, the standard screening tools by aperture descending, from bottom to top to pallets stacked seat by grooves or screw on standard screening tools for positioning. Third, the subject material is placed in a standard sieve uppermost in, (or with a standard sieve with a lid) and then set in the silk screening column head pressed against standard screening tools to tighten the wire clamping nut column standard screening tools. (Note: to force consensus on both sides, and then lock the screw lock.) Fourth, the timer switch in position corresponding need (note reading timer instructions, set a different setting time is not the same) then open power switch, test sieve began to work. Fifth, work stopped after the standard test sieve, unscrew the wire column nut, remove the first screening, careful removal of standard screening tools. Sixth, turn off the power. Note: First, the standard sieve analysis requirements horizontally. Second, make sure the power and requirements and ensuring its ground. Third, the vibrating portion can not contact with other objects. Fourth, we must by grooves or screw on standard screening tools for positioning. Contact: Miss Wang Mobile: 13837345333 Tel: 0373-4552222 Website: www.xxhhjx.com or www.hhzds.com