Imported character PEEK rods

Guangzhou Yayan Plastic Products Co., Ltd. stock: PEEK plate / rods, PPS board / stick, PVDF plate / rod, PTFE plate / rod, PSU board / stick, PEI board / stick, PI board / stick, PAI plate / rod , PPO board / stick, PBT board / stick, CPVC plate / rod, UPE board / stick, PETP board / stick, PC board / stick, POM board / stick, ABS board / rod, PMMA board / stick, PP plate / rod , PE plate / rods, imported PU board / stick, German PES board / stick, domestic PVC board / stick, Swiss engineering PBI plates / rods, Germany PA Nylon Series Plate / bar / slice, MC nylon series board. Insulation: Taiwan red, black wood, cold punch board, phenolic cloth laminated rod plates, insulation board, epoxy glass fiber rods board, epoxy board (FR-4) asbestos and so on. Static Control Products: anti-static POM board / stick, anti-static organic board, anti-static PC board anti-static PVC board / stick, anti-static nylon plate / rod synthetic stone and so on. PEEK (poly ether ether ketone) Plastics is an aromatic crystalline thermoplastic polymer material having a melting point of 334 ℃, with high mechanical strength, high temperature, impact resistance, flame retardant, acid hydrolysis, abrasion resistance, fatigue, resistance to radiation and good electrical properties. PEEK plates generally have the following model: PEEK-1000 (brownish gray): PEEK-1000 using pure PEEK resin as a raw material, the toughness of all PEEK level best, the best impact. PEEK-1000 can use the most convenient way of disinfection sterilization (steam, dry heat, ethanol, and Y-rays), and the manufacture of PEEK-1000 material composition in line with EU and US FDA regulations for food to be in nature, these features make it fit in medical, pharmaceutical and food processing industries are very common applications. PEEK-HPV (black): Add PTFE, graphite and carbon fiber results, so PEEK-HPV become a bearing grade plastic. Its excellent tribological properties (low coefficient of friction, wear resistance, high peak pressure limit) level of friction makes this an ideal material applications. PEEK-GF30 (brownish gray): This material is filled with 30% glass reinforced grade plastic fibers, have better rigidity and creep resistance than PEEK-1000, and better dimensional stability, ideal manufacture of structural parts . Can long endure fixed load at high temperatures. Such as the use of PEEK-GF30 as the sliding parts, should carefully examine its suitability as glass fibers with surface scratches.