Square Epoxy Stick

A square epoxy rods Products square epoxy stick that is one called The withdrawal by the mold hot pressing circular cross-section rod, with high mechanical and dielectric properties, suitable for motors, electrical equipment as insulating structural parts, and can be humid environment and transformer oil; generally used for arrester or insulator core rod. Second, technical indicators 1 square epoxy rods, density greater than 2.0g / cc; 2, flexural strength less than 320Mpa; 3, compressive strength of not less than 200 Mpa; 4, shear strength greater than 32Mpa; 5, the dielectric constant 3-6; 6, dielectric loss factor (50 Hz) is equal to 0.02; 7, 1. The normal volume resistivity greater than equal to 11 1.0 * 10 th Omri, when flooding is greater than or equal 9 th Omri 1.0 * 10 ; 8, parallel to the floor when the insulation resistance is greater than equal to 1. The normal 11 th Euro 1.0 * 10, when flooding is greater than, equals one billion Euro 1.0 * 10; 9, surface withstand voltage (in air pressure one minute, spacing 30mm) 14 kV; 10, vertical layer to withstand voltage (90 + -2 degrees Celsius in the transformer oil pressure five minutes) 18-20 kV; 11, parallel to the floor to withstand voltage (90 + -2 degrees Celsius transformer Oil pressure five minutes, spacing 25mm); 12, insulation resistance greater than or equal to 4 th Omi 5 * 10; 13, power frequency withstand voltage: on-load tap changer oil compartment ground clearance (transformer oil pressure, 100mm.5 minute) phase distance (according to customer technical requirements) is greater than 85 kV. 14, model specifications can be customized according to needs. In the current market information so transparent today, we in the peer than quality than price, than the service. Tips: Buy select manufacturers, after-sales service is guaranteed.