Xin Li Dong Wan Certified UV oven UV oven

It consists of fan ventilation system, the wind pipe, poly hood components. It should be noted here that the choice of fans and air volume control and exhaust manner. 1. Fans choose to be determined according to the actual situation of UV lamp power and cabinet space. Usually the wind and the wind to be delivered two fans, but there are only equipped with a flat-induced draft fan. Fan power shortage, not enough ventilation can cause overheating inside the chassis, shorten lamp life, and even melting, but also the quality of the cured product is difficult to be guaranteed; fan power if it is too large, excessive wind will make the chassis temperature is too low, UV light can not work at full power, easy to dry cured. 2. Air flow control means that the amount of wind UV curing apparatus should be adjustable. This is because you want to take into account the large temperature difference between summer and winter, many factories do not have heated workshop, so if UV curing device during the winter and summer job with the same amount of wind will certainly affect the quality of the product. The method is generally used to control two temperature-controlled fans, up to a certain temperature to automatically start a wind turbine, and then reaches a certain temperature and then start another wind turbines, and set to live on the exhaust and intake valves to control air intake air and exhaust air volume. 3. Exhaust way means taking the lead on the lower winds blowing or blowing with the wind and other means. But no matter what way, not blowing directly on the lookout UV lamp, because the consequences of doing so is to make UV light due to heat loss is too big and can not work at full power (non-glare lighting changes from white to blue). the ink can not dry. UV oven, UV light boxes, simply, it is used for UV curing machine. Widely used in cell phone case, CD, membrane switch, plastic housing, UV lacquer coating surface; mainly used in the following areas: UV adhesive bonding (horn, cable, micro-motor optical components and other electronic products) paint curing (ink, paint, varnish) Printing (UV ink, varnish) Various UV research laboratory Shenzhen Xin Li of plastic industry professionals to provide UV light box manufacturers! Welcome your advice!