Longhua screw rubber prices Xin of producing plastic screws plastic screws wholesale prices

Removing the screws coated gum products are sometimes to be removed during maintenance, plastic screws different screws different points, the demolition of the different methods. 1 small screw (m2-m12) available low-intensity plastic screws product after disassembly only with a relatively large torque can damage the layer, if the product is to frequent removal service can also be used in low-intensity plastic screws, forced demolition clean with alcohol residue, you can glue the second. 2. No. screw (m12-m20) can be used in strength and high strength plastic screws, medium strength torsion damage layer can be demolished, disassembly high strength is not very good, you can use the heating method to be demolished. 3 large screws (M20 above) are of high strength plastic screws, of course, it is also more difficult to dismantle, can be hot hair dryer to warm the screws, heated one side while twisting force, slowly open the can. Also by the use of a solvent to soak, but for a long time, but the effect is not obvious. Of course, the election of plastic screws only key, whether they wanted to frequent maintenance, whether you want a high intensity, whether it is permanent lock, are to be considered in the selection of plastic! Shenzhen Xin of industrial rubber accessories line production of plastic screws, anaerobic use can be divided seal fastener locking and sealing, flange and pipe fitting, adhesive holding and infiltration plugging. This classification method is simple, easy to remember and easy to use, particularly easier for users to accept. Although the types of plastic has many uses, but there is always a main uses as a basis for classification