Jieyang Jieyang silk screen printing ink printing ink printing ink company wholesale Jieyang

Jieyang Jieyang silk screen printing ink printing ink printing ink company wholesale Jieyang Jieyang Jieyang silk screen printing ink printing ink printing ink company Jieyang wholesale Product Description: substrates: soft polyvinyl chloride (PVC), wood, imitation nylon, leather, paper and other products, for example: PVC inflatable toys, household goods, shoes, hats, travel bags, sports and other product characteristics: high light resistance movement adhesion test project abrasion resistance, scratch resistance test results were excellent rubbing 2-3 4 4 3 -5-level Technical Data: Item Hue color density fineness viscosity solids content fluidity gloss technical parameters reference color card 8% -15% 7u less 100-180p 65-80 20 -30mm / s ≥45% Description: Network board: 150-300 mesh polyester screen printing plate Squeegee: 65-85 degrees is recommended polyurethane squeegee Dosage: 250 mesh screen printing is about 30 m / kg Drying: Natural evaporation drying (7-15 minutes Tack , hard work more than 24 hours) or below 60 ℃ hot air drying solvent used: 007 (drying, dry, slow dry) solvents; 719 quick-drying water, 718 or 783 slow dry water dry water, were due to different printing environment temperature appropriate selection of stencil cleaning: use of organic solvent cleaning (eg: 007 net wash water) Note: When printing soft PVC, because the substrate contains a lot of plasticizer is very likely to produce inks when printed laminated back sticking affect print quality. So, after using the ink, must be taken to avoid stacked?  take along insect enzymes shin poured  negligent quilt quilt hug? Printing soft PVC, due to the nature of the ink pigments are decided, 203,206,302,308 and all fluorescence color ink color when stacked prone to migration affect clean prints. So, try to use when printing color and good resistance to migration, such as: 2030,2060,3020,309 or 3018. Printing in color ink on soft PVC, it is easy due to the influence of the ink pigment permeation resistance and substrate causes a change in color, so we choose the color of the ink when necessary to pay attention to be selected according to each color ink characteristics or to control the dosage. When printing such as the use of soft PVC 783 or cyclohexanone do major diluent, please note that the effect of solvent on the substrate. Packaging: 1 kg loading 5 kilos and 20 kilos Storage conditions: 5 ℃ -25 ℃ condition for two years, to avoid glare, anti-exposure to acids, alkalis