The aqueous slurry backing anti-sublimation manufacturers offer sheet

Anti-sublimation aqueous primer gray pulp Product Name: Water-based anti-sublimation primer gray paste, anti sublimation base price, anti-sublimation backing pulp usage, rendering pulp price Features: to prevent or mitigate sublimation color migration, the appearance of gray and black. Applicable kinds of cloth: TC or polyester and used in a variety of chemical fiber fabrics. Anti-sublimation base price, anti-sublimation backing pulp usage Product Usage: 1. Anti-sublimation printed aqueous slurry primer 2-3 times each over the printed surface after drying. 2. Then printed on the mortar 2-3 times each over-printed with a rear surface drying resin body. 3. This can not be added to cement slurry into the mix, this will reduce the anti-sublimation. Anti-sublimation aqueous slurry primer gray, anti-sublimation printing material base price Guangzhou drying methods: natural drying, to obtain the best washing fastness, dryer temperature of 130 ℃ -150 ℃ or 302 degrees Fahrenheit, the time is 2-3 minutes, the air flow is 2000cfm climate: temperature 24 ℃, humidity of 80% RH. Screen cleaning and storage: halftone and tools promptly cleaned with water, should be stored at room temperature with less than 30 ℃ to avoid direct sunlight or high temperatures for a long time in order to avoid slurry changes. Note: The aqueous slurry of anti-anti-sublimation color performance not only performance-related and water-based glue, while the nature of the fabric used in dyeing related to low quality sublimation disperse heat easily. Such as improper operation will affect an aqueous slurry of the anti-sublimation effect. The product at the time of sampling, testing must be done carefully, pay attention to the other using the product with other common water-based glue. For more information visit the company website for http://lifengyinhua.ccedpw.com http://shop1395035329730.1688.com http://lifengyinhua88.b2b.hc360.com