Low-cost anti-sublimation backing pulp manufacturers, wholesale

Product Name: Water-based anti-sublimation primer gray paste, anti-sublimation base price, anti-sublimation backing pulp usage, rendering pulp price Features: to prevent or mitigate sublimation color migration, the appearance of gray and black. Applicable kinds of cloth: TC or polyester and used in a variety of chemical fiber fabrics. Anti-sublimation base price, anti-sublimation backing pulp usage Product Usage: 1. Anti-sublimation printed aqueous slurry primer 2-3 times each over the printed surface after drying. 2. Then printed on the mortar 2-3 times each over-printed with a rear surface drying resin body. 3. This can not be added to cement slurry into the mix, this will reduce the anti-sublimation. Screen preparation: Screen: Suitable for 80-120 mesh (32T-47T) Blade: 55-65 applies to anti-sublimation of the aqueous slurry primer gray, anti-sublimation printing material base price Guangzhou drying methods: natural drying, to obtain Best washing fastness, dryer temperature was 130 ℃ -150 ℃ or 302 degrees Fahrenheit, the time is 2-3 minutes, the air flow is 2000cfm climate: temperature 24 ℃, humidity of 80% RH. Screen cleaning and storage: halftone and tools promptly cleaned with water, should be stored at room temperature with less than 30 ℃ to avoid direct sunlight or high temperatures for a long time in order to avoid slurry changes.