Three-dimensional transparent water-based paste factory price

Three-dimensional stereoscopic transparent aqueous slurry pulp factory, Guangzhou thick paste, Zhejiang price thick paste, thick paste printing material 1) Resin Type: self-crosslinking acrylic and PU polymer 2) Appearance: white glue, white burnt like; transparent plastic, white burnt like 3) Odor: low single odor 4) Viscosity (25 ℃): 140000-150000CPS 5) PH value (25 ℃): 7.0-8.0 6) ionic character: anionic Product Features This product is environmentally friendly printing resistance; thick paste three-dimensional effect, strong adhesion; thick paste high gloss, feel good, good fastness; surface smooth, anti-adhesive back strong; after SGS testing authority, in line with international standards applicable environmental testing range cotton, T / C cloth for printing to three-dimensional effect. Use thick paste printing - natural drying 12 hours (until completely dry) or oven to 130 ℃ bake 3 minutes - completely dry after washing resistant to 50 ℃ 2 hours. 1) The product typically use 80 or 120 mesh screen, the screen must be taut. Then 4-5 layers thick photosensitive paste sizing, the photosensitive film thickness is about 1-1.5mm, after dry exposure with an ultraviolet lamp for 15-20 minutes, then rinse with water. 2) thick film printing positioning must be accurate, when printing from the screen version of the same fabric is best to keep 2-3Mm, do not pay attention to the screen and fabric touch. 3) In order to ensure the printing effect, generally depending on the thickness to be printed 5-8 times, each generally includes 2-4 times, India with bake