Leeport high foam slurry, thermoset foam pulp factory wholesale

Features sensual, good three-dimensional effect, the surface smooth, feel soft, fastness Good players work industry and has a good foaming power, can be used for white printing and colored printing. Foam printing smooth surfaces, high foam pulp prices, Guangzhou foam pulp, printing foam printing process to use: In order to better stereoscopic shall overlap printing twice. Namely: Printing - dry - printing - dry (or low-temperature drying) - Heated pressure hot - foam molding, foaming effect to achieve smooth surface shall be about 110 ℃, the time is about 30 seconds of pressure perm To make foaming bubble colorful, shiny or elastic, to be added to the foam coating overprint in pattern top with flexible transparent pulp. Namely: Foam paste printing - dry - printing - dry - transparent paste plus paint printing - dry or low temperature drying - Heated foam molding (1) is appropriate to 80-100 mesh screen (2) heating pressure Hot: 100-110 degrees * 30 seconds (3) According to the different requirements of foam height, adjust the amount of foam pulp, while paying attention to the fastness change (4) must be coupled with sufficiently dried after foaming After printing paste, or prison and flatness are affected (5) have a different effect on the foaming effect mortar and fastness, adequately tested before deployment