16 years manufacturers specialized in producing credit brightening agents

16 years manufacturers specializing in the production of credit cards brightening agents Quanxin paper credit brighteners brighteners The credit is additive or additives in the spray surface of a variety of paper pulp production, which can solve all kinds of paper production stick cylinder and off paper powder, paper dark, no smoothing Bailey disease, make paper fiber with the appropriate softness and smoothness, so that the friction surface of the web and the dryer is reduced, giving special glittering paper. A 16-year manufacturer specializing in the production credit brightening agents Physical and Chemical Indicators credit brightening agent Appearance: milky white liquid Solid content credit brightening agents 35% ± 0.1% credit brightening agent PH: 7 credit brightening agents Ion: Cationic two 16 years manufacturers specializing in the production of the product performance 1 credit brightening agents, brightening agents can be given credit peeling paint coating on the dryer away from all kinds of resistance, increases paper gloss, to prevent sticking cylinders, such as raising Bailey disease. 2 , adding brighteners on the dryer cylinders melt adhesive coating can impart good peeling. 3, the papermaking process, adding an appropriate amount of slurry, can solve the problem of sticky paper cylinder, increasing the paper's surface strength and smoothness, reducing breaks, decapitated. 4, adding a brightening agent can be sprayed directly onto wet sheet of paper in order to improve the brightness, smoothness, and the like. 5, adding a brightening agent in the presence of trace Al3 + ready-breaking, so they can achieve good sizing effect. Third, the 16-year manufacturer specializing in the production amount of a credit brightening agents, brightening agents within credit added: 0.1-0.3% (relative to pulp) after adding 10 to 100 times diluted. 2, adding brightener pigment coating 1-5% (relative pigment solids) 3, graced brightening agents dryer coating: diluted 100-fold continuous coating 4, adding brighteners surface spray dosage: 0.3 0.5% Fourth, the 16-year manufacturer specializing in the production credit brighteners use of methods and precautions: 1, the amount of credit brightening agents should range 0.2-05kg / t (absolute dry amount) 2, adding a brightening agent added at the wet end , the general directly added to the slurry or white water use, stir either, but in order to avoid the chemical state of the wet and dry unit may also be sprayed onto the sheet into the press in front of or directly sprayed on the dryer surface to produce a very uniform The covering mucosa. 3, adding brighteners added to the coated paper coating can replace or reduce the use of lubricant SCD SCD, which can reduce the migration of adhesive to the surface of the coating, the effect of improving ink absorption, paper coating uniformity, gloss , smoothness and other properties were improved in varying degrees, to ensure a good calendering effect, reducing the occurrence of uneven ink absorption. 4, adding brighteners should be diluted before use 10-100 times, stir together the period of not less than 10 minutes. Ensure good mixing effect, especially the first time to add, should be added in small amounts, depending on the credit effect, in order to minimize the amount for the best. 5, adding a brightening agent in the wet sheet may also increase the brightness of direct spray water and other moisture-performance paper products. Five, 16 years manufacturers specializing in the production of credit brightening agents Scope: credit brightening agent is particularly suitable for the production of recycled fiber and specialty paper grades, stick cylinder phenomenon caused by various reasons, have an immediate effect, the elimination of stick cylinder breaks, increased smoothness effects. Six, 16 years manufacturers specializing in the production of credit brightening agents Packaging and storage: 1, adding a brightening agent with 25kg plastic barrel, also according to user requirements. 2, adding a brightening agent to be stored at a temperature of 0-40 ℃ cool ventilation, either by breaking below 0 ℃. This product is non-toxic, pollution-free, not burning, not explosive. Technical support: Zhang Gong 13,561,767,963 13,563,803,298