16 years manufacturers specialized in producing credit strippers

16 years manufacturers specializing in the production of release agents Quanxin credit card paper credit credit strippers strippers paper is one of a variety of paper production in the pulp dryer Tu Fu additives and agents, adding the release agent can solve a variety of paper production stick cylinder and dropped paper powder Bailey disease, adding a release agent to make paper fiber with the appropriate softness and smoothness, so that the friction surface of the web and the dryer is reduced, giving special glittering paper. A 16-year manufacturer specializing in the production credit strippers strippers credit Physical and Chemical Indicators Appearance: Light yellow emulsion credit strippers solid content 20% ± 0.1% credit strippers PH: 7 credit strippers Ion: nonionic II 16 years Manufacturers specializing in the production credit strippers product performance 1, adding the release agent can be given on a variety of coating peeling paint from the dryer, increase gloss, to prevent sticking cylinders, such as raising Bailey disease . 2, graced the release agent in baking the dryer cylinder coating can impart good melt adhesive peeling. 3, adding the release agent in the papermaking process, adding an appropriate amount of slurry, can solve the problem of sticky paper cylinder, increasing strength and surface finish, reducing breaks, decapitated. 4, adding the release agent in the presence of trace Al3 + ready-breaking, so they can achieve good sizing effect. Third, the 16-year manufacturer specializing in the production credit release dosage 1, internally added: 0.1-0.3% (relative to pulp) after adding 10 to 100 times diluted. 2, pigment coating 1-5% (relative pigment solids) 3, dryer coating: diluted 100-fold continuous coating four 16-year manufacturer specializing in the production credit strippers use of methods and precautions: 1, adding the release agent shall be in an amount ranging from 0.5-3.5kg / t (bone dry) 2, adding the release agent added at the wet end, usually directly added to the slurry or white water use, stir either, but in order to avoid the chemical state of the wet and dry section It can also be sprayed onto the sheet into the press in front of or directly sprayed on the dryer surface to produce a very uniform coverage mucosa. 3, adding a release agent is added to the coated paper coating can replace or reduce the use of lubricant SCD SCD, and graced the release agent can reduce the adhesive to migrate to the coating surface to improve ink absorption effect, paper coating uniformity, luster degree, smoothness and other properties were improved in varying degrees, to ensure a good calendering effect, reducing the occurrence of uneven ink absorption. 4, adding the release agent should be diluted before use 10-100 times, stir together the period of not less than 10 minutes. Ensure good mixing effect, especially the first time to add, should be added in small amounts, depending on the stripping effect, in order to minimize the amount for the best. Five, 16 years manufacturers specializing in the production of credit strippers Scope: credit to the release agent is particularly suitable for the production of recycled fiber and specialty paper grades, stick cylinder phenomenon caused by various reasons, have an immediate effect, the elimination of stick cylinder off paper, increasing finish with special effects. Six, 16-year credit strippers manufacturers specializing in the production of packaging and storage: 1, adding the release agent with a 25kg plastic barrel, also according to user requirements. 2, adding the release agent should be stored at a temperature of 0-40 ℃ cool ventilation, either by breaking below 0 ℃. Credit stripping agent non-toxic, pollution-free, not burning, not explosive. Technical support: Zhang Gong 13,561,767,963 13,563,803,298