UV washing water

UV ink cleaner UV ink cleaning agent designed for use UV ink (UV ink) printing press cleaning. This product is a combination of eco-solvent complexes composed of non-toxic, harmless, non-flammable, storage security. Ink rollers and machinery without any adverse effects and damage. Can effectively remove the UV curable ink. Usage: 1, the main proposal before the car wash the ink roller and the transfer roller separation. 2, the ink scraping hang, but do not tighten ink scratch. 3, start the machine to high speed, and then on the roller back and forth from right to left two spray UV ink cleaner, the purpose of the cleaning agent in combination with UV inks, the process of completion of the first colostrum. Separated by about one minute and then spray a cleaning agent, which aims to enhance emulsification. Let the machine run for about one minute after natural third round two spray cleaners, UV ink original purpose to make a full emulsification. Natural machine to be run for about 1 minute to tighten the ink scraping. (Note: The amount of each spray can not be more than 30 ml, it may cause the ink roller slipping while two should increase the amount of ink roller cleaning agent ink thick places should also increase the amount of cleaning agent...) 4, ink scraping tight after the ink on the ink roller will continue to fade, then every 30 seconds on the ink rollers suitable spray two rounds UV ink cleaner, (AIM: residual ink emulsion), process approximately 2-5 times. Until the roller is clean. (Note: If the ink blade port does not usually contact between the ink stick and not affect the cleaning efficiency is recommended to use a human to make contact between the ink and ink stick blade mouth good plan to replace the good ink scratch). 5, plus a small amount of water on the ink roller. (Objective: to be cleaned of residual ink emulsification). 6, although this time the ink rollers are thoroughly cleaned. But it failed to shut down, continue to let the machine run the water until the full original ink roller dry before shutdown. 7, in the press a good case, Gibo brand UV ink cleaner printer ink roller cleaning only 4 to 6 minutes.