Yinchuan factory direct distribution equipment Fire FRP cable tray, FRP cable ..

Trough cable tray is a fully enclosed cable tray, it is best suited for shielding interference laying computer cables, communication cables, thermocouple cables and other highly sensitive system control cables and heavy corrosive environment protecting the cables have a more good results. Existing network-based open architecture not only allows the cable bridge most significant ventilation, saving energy consumption, optimize cable performance, but also to prevent water, dust, debris accumulation, bacteria easily breed, cleaner, reducing the incidence the risk of fire or other safety hazards. These unique characteristics to Chinese customers by surprise. Summary down are: light weight, 30% lighter than conventional tray - 60%; 90% open space; high mechanical strength, easy to cut; can give full play to your imagination freely configurable style; no screw nut; for data cable Design Accessories; with convincing carrying capacity; for customers to save space and time, saving installation time than conventional tray 1/3; unique bend method, fast and beautiful; at 1000 degrees Celsius temperature can be maintained 90 minutes, to protect the safety of the bridge, the largest bridge is certified and so on. Bridge is a tray, ladder straight sections, the elbow, accessories and support, hanger, etc., the general term for supporting cable has a continuous rigid structure of the system. It is used in the horizontal cabling and vertical mounting channel cabling system. Cable bridge is to make wires, cables, cable laying pipe to achieve standardization, serialization, universal cable laying equipment. It should be mentioned that the concept of a tray, a lot of people have mixed into one tray and the tray that functions much the same, it is not. The presence of the bridge and trough big difference, mainly: the bridge is mainly used for laying power cables and control cables, ducts for laying communications wire and cable; bridge relatively large (200 × 100 到 600 × 200), trough relatively small; tray turning radius is relatively large, trunking most Abduction bent at right angles; the bridge span is relatively large, relatively small trough; fixed, different installation methods; in some places not covered bridge, trunking is usually full with trunking lid closed to trace, bridge is used to take the cable. Thus, we note that the bridge should be selected in order to avoid wrong and did not meet their intended purpose.