FRP cable tray prices 200100

Zaoqiang Rongxing GRP Ltd. cable bridge specifications are a lot of different specifications have different properties and applications, to introduce the following three common types of glass and steel cable bridge. Epoxy Composite FRP cable cable tray: traditional metal tray surface coating thickness is small, in the transport, installation easily damaged, and the surface of the fine pores, corrosive gases easily through the holes into the structure layer on the preservative effect ; strong non-metallic cable tray corrosion resistance, but insufficient mechanical strength. Based on these circumstances the company developed epoxy composite cable tray: it increases the metal skeleton epoxy resin cable tray, not only retains the original characteristics of the epoxy resin cable tray, while increasing the mechanical strength, can carry large diameter cable, the bridge span up to 12 meters. To solve the problem of delamination due to metal and nonmetal caused by different coefficients of expansion between the metal and non-metal bonding layer added; in order to solve the easy powder, easy to aging problems in the molding surface of the bridge with anti-light and other the special role of the protective layer; epoxy composite cable bridge life by the authority identified in more than 30 years, this product has been used for 15 years, faded and signs of aging do not appear; epoxy composite cable bridge most suitable corrosive environments, the use of large span, heavy load conditions. FRP pultruded cable tray home and abroad using more advanced fiberglass pultrusion process, continuous mechanized production, so that not only has the advantage of fully bridge the domestic counterparts of production, and the product size and stability, and can be arbitrarily selected length over 8 meters, higher strength, stiffness and corrosion resistance. FRP pultruded cable tray is untwisted fiberglass and composite fiber with a variety of weather resistant, corrosion-resistant resin, according to different occasions, a certain proportion, at a certain temperature by mechanized continuous molding, not only compared with hand lay Molded economical and more productive, especially more can choose the size and quality of the products can be more effectively guaranteed, therefore pultruded cable tray replace iron bridge application is inevitable in the future. My company's existing FRP Bridge models have 100 * 100 200 * 100 300 * 100 200 * 150 600 * 100 zaoqiang ---- Rongxing Glass Co., Ltd. supply all kinds of glass steel cable bridge, and in accordance with design drawings provided by the customer produce different specifications, different shapes. Welcome all the friends come to call negotiation advice, contact: Du Jingli, telephone 18832889926