Dongguan Taimei TM11 thermostat temperature switch / Dongguan thermostat switch. Thailand and the US electrical thermal protection ..

Product Name: TM11 temperature switch / thermal protector / sudden jump thermostat / button-type temperature switch manufacturer Model: TM11 ● TM11 thermostat applications ⑴ sterilizer thermostat, ⑵ dishwasher temperature switch, ⑶ Office equipment temperature limiter, ⑷ microwave thermal switch, ⑸ water dispenser thermostat switch, ⑹ electric kettle thermostat, ⑺ dryer temperature protection, ⑻ coffee maker anti-dry thermostat, ⑼ sandwich toaster thermostat switch, ⑽ car seat heaters, car antifreeze Used sudden jump thermostat, electric skillet temperature controllers, refrigerators overheating protection, over-temperature protection air conditioning, laminator and other electric appliances. ● TM11 thermostat technical parameters ⑴ electrical parameters: 1) CQC, VDE, UL, CUL AC250V 50 ~ 60Hz 5A / 10A / 15A (resistive load) 2) UL AC125V 50Hz 15A (resistive load) ⑵ operating temperature range: 0-300 ℃ (optional), temperature accuracy: ± 2 ± 3 ± 5 ± 10 ℃ ⑶ recovery and action temperature difference: 8 ~ 100 ℃ (optional) ⑷ Connection: plug terminals 250 # (bend 0 ~ 90 ° optional); plug terminals 187 # (bend 0 ~ 90 ° optionally, the thickness 0.5,0.8mm optional) ⑸ life: ≥ 100,000 times ⑹ electrical strength: AC 50Hz 1800V lasted 1min, no flicker, no breakdown ⑺ contacts Resistance: ≤50mΩ ⑻ Insulation resistance: ≥100MΩ ⑼ Contact form: Normally closed: temperature rise, contacts open, the temperature drops, contact connected; Normally open type: temperature rise, contact connected, the temperature drops, contact ⑽-break shell protection grade: IP00 Installation: TM11 Series Installation ordinary activities ring, ring install small round activities, installation of flat panel active ring, with mounting holes ordinary large aluminum cover with mounting holes lengthened aluminum cover. ● TM11 thermostat competitive advantage of high precision ⑴ ⑵ ⑶ stable performance, small size, light weight small ⑹ no arc ● TM11 thermostat Notes ⑴ grounding: The thermostat metal cover is connected to the equipment grounding metal parts. ⑵ when using a contact temperature installation, should be charged with snapping the metal to cover up the mounting surface of the appliance to ensure that the temperature effect, should be coated with thermal grease, or other properties of similar thermal medium surface temperature. ⑶ not installed when the top flaps collapsed, loose or deformed, so as not to affect performance. ⑷ not allow the liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals. ⑸ product is not greater than 5A current circuits in use, should be selected cross-section of 0.5 5-1㎜2 copper core wire connection; the circuit is not greater than 10A current use, should be selected cross-section of copper conductor wire connection 0.75-1.5㎜2 . ⑹ product should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilated, clean, dry, non-corrosive gases stored in the warehouse. ⑺ use can not bend the terminals, otherwise it will affect the reliability of the electrical connection through the following certification