Digital Multimeter TH1941

Digital Multimeter Model: TH1941 Instrument: Features Features ■ 21,000 / 51,000 readings display ■ various parameters of the test function DCV / ACV, DCI / ACI, Ω, frequency / period, diode, conduction, dBm twelve measurement functions ■ large-screen high-brightness vacuum fluorescent (VFD) dual monitors ■ True RMS (RMS) AC voltage and current measurements, bandwidth up to 100kHz ■ also shows AC + DC, AC + Hz, Readout +%, Readout + dBm and other parameters ■ maximum test speed of 15 times / sec (TH1941), 30 times / sec (TH1942) ■ DCV measurement accuracy of up to 0.02%, resolution of 10μV ■ measuring percentage display ■ Zero offset (REL) mode to eliminate residual reading test ■ Calibration without opening ■ Limit function (HI / IN / LO) for fast sorting test ■ Standard RS232C communication interface provides a convenient system of communication type a brief description of BriefIntroduction TH1941 and TH1942 41/2 digit multimeter type to 50,000 readings DMM is a versatile, low-cost voltage / current / resistance tester. The instrument can be stable measurement several times higher than the same products in the measurement speed. Provide 21,000 / 51,000 word maximum reading, 0.02% of the maximum DC voltage accuracy and a series of excellent performance and affordable price for our customers to provide the best choice. TH1941 / TH1942 provide high brightness VFD dual-display, can be measured simultaneously display AC / DC voltage or current, AC voltage / current and frequency and other parameters, not only greatly improve the measurement efficiency and make the test shows at a glance. The SMD components to reduce the overall density and lower volume. Instrument comes standard with RS232C communication interface, while providing a common communications and computer software to meet your communication, data analysis, statistics, and building up automatic test system. The system accepts SCPI (Standard Commands for Programmable Instruments) command to ensure compatibility of communication software. MeasurementFunctions test function test parameters DC voltage, AC voltage, DC current, AC current, resistance ,, frequency, period, conduction, diode mathematical functions%, dBm, REL range of automatic and manual display VFD, dual display readout mode single display: All Measurement parameters dual display: VAC + VDC, IAC + IDC, VAC + Hz, IAC + Hz, Readout +%, Readout + dBmReadout + Max / Min trigger INT / MAN / BUS readings remain within the error range is set for a given test block-by-block number of data to find the best stable reading comparator can discriminate HI, IN, LO status and display, and issued ALARM information ring (which can be on / off) Communication interface RS232C in HI / LO when, SCPI command programming stand by