Shenzhen, Dongguan, Foshan DMTV battery voltage tester battery tester

Product Description DMTV-4D detector is mainly aimed at the production line operator through the lithium battery voltage detection to determine whether the product is qualified. DMTV-4D detector hardware used in a modular design, enhanced flexibility of use, user-friendly expansion of output, optional sound detector alarm output, but also optional analog transmit output, or standard communication interface (RS485 or RS232). DMTV-4D detector compared with the multimeter, it has the following characteristics: 1. Measurement speed, the detector measurement speed up to 10 times / sec, when connected to the lithium batteries can immediately measure the current value, suitable for the production line operators fast manual inspection. According to the site using the test, a skilled operator to use the detector can detect from 7 to 10 per product. 2. High precision measurement accuracy of 0.1% F.S ± 1 words. 3. If you are using a multimeter, the operator detects a product need to see each multimeter, determine eligibility based on artificial products. Use DMTV-4D detector, the operator simply listening to the sound detection of each product you can determine whether the product is qualified. DMTV-4D detector can be built-in alarm buzzer, when the output voltage value is higher or lower than normal, the detector their own judgment whether the product is qualified, then prompts the operator through the sound. This will greatly improve the efficiency of the operator, and to eliminate the human factor, to ensure product quality. 4. DMTV-4D detector scalable communication interface, it can transfer the detected data to a computer or a terminal device (maximum transmission distance of up to 1200 m), for the user to analyze product data. 5. DMTV-4D detector is a maintenance-free instrument, with automatic zeroing technique can be long-term use does not produce any zero drift, using digital correction technique eliminates the less stable adjustable resistance, so the detector itself will not The increased use of time an error occurs. 6. Able to identify open, 0 voltage state, when measuring positive and negative leads at both ends of a short circuit, over-range detector will not burn.