Wheat straw balers work process and the principle of low prices

Wheat straw balers work process and low price principle 1, the working principle of matching power applies to 18 horsepower tractors with rear power output. Mainly through the pickup mechanism, rolled roller mechanism, put the rope around the body and tied mechanism automatically complete soft stem grasses (wheat, rice straw, etc.) pickup, molding, bundling and bundle discharge process. 2, the working process of the power output shaft of the tractor via universal shaft, the power input to the input shaft of the tractor balers by sprocket chain drive pickup mechanism and were rolled roller mechanism; tractor hydraulic output interface control telescopic cylinder piston, put the bundle of work to achieve. Pick-up balers tractor straddle the ridge in a straw after harvest, along with the tractor forward, hang power output shaft, pre-adjusted height appropriate pickup mechanism began to turn into the pressure chamber volume gradually from small straw larger form close round bales. When the bale reaches a predetermined density, the switch automatically opens up tight, alarm horn sounds, the driver stopped the tractor forward, push the clutch around the rope around the rope start, when found in fast delivery Size of the pull, release the clutch, tractor PTO continue belay starting rotation. After a predetermined number of turns around, automatically cut off the rope, roping end. Operator pulls the hydraulic lever hydraulic valve commutation, cylinders work frame open after throwing bales. After the release bundle, reset the hydraulic valve, close the rear frame, the end of a cycle, tractors move forward, the next pick up the beginning of a cycle.