XKGK-2000-10-4 Dry Hollow limiting reactors

Dry Hollow limiting reactor in series with the power system product use, if the system fails to limit the short circuit current. And maintain the bus voltage, short circuit caused because the system will not be too low, in order to ensure quality of supply. Features: 1. Parallel multi-duct structure, epoxy glass fiber wound coating. The impact of potential distribution uniform, short-circuit current withstand shocks. 2. The use of advanced computer-aided design, according to user requirements, quickly and accurately determine the structure and parameters of the product. 3. In the form of dry hollow reactor to eliminate the oil leakage of oil drawbacks, and no core saturation of concern, good linearity inductance value. 4. Winding wire using membrane package winding more small cross-section, with excellent insulation properties, low loss, light weight, small size, maintenance-free characteristics. 5. Reactor overall UV resistant cycloaliphatic epoxy encapsulated wet wrapped fiberglass, with excellent water resistance to ultraviolet, long-term operation in outdoor environments. Dry Hollow Reactor single-phase production, installation flexibility, both three stacked containers, but also horizontally arranged three-phase main technical indicators. Rated voltage, rated current, rated reactance rate. 2. Overload capacity: rated current continuous operation. 3. Thermal stability: it can withstand rated reactance rate down several times the rated current, the time for 2s. 4. Dynamic stability: ability to withstand thermal stability 2.55 times the current, time 0.5s, no mechanical damage to any hot. 5. Temperature: average coil temperature ≤75K (resistance method). 6. Insulation level: LI200AC95kV (35kV systems) LI125AC65kV (20kV systems) LI75A2kV (10kV systems) LI60AC30kV (6kV systems) installation and minimum magnetic spacing dry hollow reactor has mounting points two horizontal and vertical installation. Inlet and outlet terminal angle is 0 °, 90 °, 180 ° three kinds, if the user outlet terminals direction special requirements, when ordering. When installing hollow reactor, the reactor should ensure that other metal parts from the minimum net magnetic space (see below). For net spatial distances and large metal parts form a closed loop of metal parts should increase.