CKGKL-72 / 10-6% dry hollow series reactor

Usage and power system reactive power compensation device parallel capacitor in series to limit inrush current and operate the gate capacitor bank voltage, while suppressing the higher harmonic system, improve. Features: 1. Parallel multi-duct structure, epoxy glass fiber wound coating. The impact of potential distribution uniform, short-circuit current withstand shocks. 2. The use of advanced computer-aided design, according to user requirements, quickly and accurately determine the structure and parameters of the product. 3. In the form of dry hollow reactor to eliminate the oil leakage of oil drawbacks, and no core saturation of concern, good linearity inductance value. 4. Winding wire using membrane package winding more small cross-section, with excellent insulation properties, low loss, light weight, small size, maintenance-free characteristics. 5. Reactor overall UV resistant cycloaliphatic epoxy encapsulated wet wrapped fiberglass, with excellent water resistance to ultraviolet, long-term operation in outdoor environments. 6. Dry Hollow Reactor single-phase production, installation flexibility, both three stacked containers, can also be arranged in a three-phase level. The main technical indicators. Rated voltage, rated current, supporting the capacitance of the capacitor. 2. Overload capacity: 1.35 times the rated current for continuous operation. 3. Thermal stability: it can withstand rated reactance rate down several times the rated current, the time for 2s. 4. Dynamic stability: ability to withstand thermal stability 2.55 times the current, time 0.5s, no mechanical damage to any hot. 5. Temperature: average coil temperature ≤75K (resistance method). 6. Insulation level: LI200AC95kV (35kV systems) LI125AC65kV (20kV systems) LI75A2kV (10kV systems) LI60AC30kV (6kV systems) installation and minimum magnetic spacing dry hollow reactor has mounting points two horizontal and vertical installation. Inlet and outlet terminal angle is 0 °, 90 °, 180 ° three kinds, if the user outlet terminals direction special requirements, when ordering. When installing hollow reactor, the reactor should ensure that other metal parts from the minimum net magnetic space (see below). For net spatial distances and large metal parts form a closed loop of metal parts should increase. Implementation of standards JB5346-1998 "series reactor" DL462-92 "high-voltage shunt capacitor series reactor orders and technical conditions" Ordering Basic Data 1. 2 rated capacity. System voltage 3. Rated reactance rate (or nominal reactance) 4. Rated current and maximum continuous operating current 5. Short-time peak withstand current and duration 6. Supporting capacity capacitor 7. Supporting rated terminal voltage capacitor 8. Installation (horizontal or vertical stacking) 9. Conditions of use (indoor or outdoor) 10. Inlet and outlet angle of 11 terminals. Shall be specified in the contract based on other performance data series reactor applications required