XJ-6010 line protection and monitoring device

Line protection Line protection Line Microcomputer Protection Line Protection Line Protection parameters manufacturers offer a line protection, line protection and monitoring device Introduction XJ-6010 is a line protection and monitoring and control for 66KV voltage level and below in harsh industrial sites, such as there is strong interference steelworks, IF heaters. Used for the center cabinet. Second, the protection function configuration: (1). Speed ??off (2). Overcurrent (3). Overload (4). Overload trip (5). Zero sequence overcurrent (6). Zero-sequence overvoltage (7). Loss of pressure (8). Reclosing (9). Overvoltage (10). Low voltage Third, the technical parameters and characteristics of 1, the technical parameters: (1) Rated AC voltage: 100v (2) Rated AC frequency: 500hz (3) Rated AC current: 5A or 1A (when ordering) (4) Rated working voltage : AC / DC220V or AC / DC110V (when ordering) 2, the product features: (1) for harsh industrial sites, steel mills, etc. If strong interference (2), the use of liquid crystal display loop current, voltage, etc. the required electrical quantities, and the kinds of information protection action operation is displayed on the screen (3), enhanced cell box are sealed, internal shielding, strong anti-vibration, anti-jamming performance, can be adapted to special environment, can also be dispersed group screen installation mounted on the switch cabinet (4), running gear with full suspension design, CPU 4-layer circuit board, can be very effective in preventing interference pulses and surges (5), having a record date 100 event records, and with power protection, information can be viewed in the event log (6) hardware system can be extended, less module category, powerful (7), the device has four remote interfaces and can be remotely modify the set value and switching protection operation mode, with GPS clock or remote for an interface (8), closed chassis, strong anti-interference design for harsh environments, high reliability, in line with IEC standards for electromagnetic compatibility (9), the power supply AC and DC Dual (10), ultra-low power (11), enabling remote setpoint setting and modifying (12), chronological record and upload SOE time (13), large-screen character LCD display, keyboard