DYK8000 switchgear intelligent control device

Switchgear intelligent control device ▲ Dynamic Rendering: According to a wiring scheme users, mask making, will break part (such as circuit breakers, handcart position, grounding switches, storage, etc.) with a dynamic indication module display, real-time dynamic constitution instructions, thereby bringing more intuitive operator, richer, more accurate status information appears as follows: ▲ voice prompt: ① breaker closing state, mistakenly push the trolley when the test position to the working position from the voice prompt "Please sub-breaker "; ② grounding switch closing state, mistakenly push the trolley when the test position to the working position from the voice prompt" sub-grounding knife "; ③ circuit breaker closing state grounding switch closing state, mistakenly hand push the car from the test position to the working position, the voice prompt "sub-breaker earthing"; ④ when the cabinet main circuit power transmission before the cabinet was to stay, voice prompts "the main circuit of the cabinet has been charged" (with the human body sensing probe The product has this feature). ▲ operating functions: ① temperature and humidity control; ② points off; ③ storage; ④ remote / local; ⑤ lighting operation. ▲ Charged display: LED striking voltage (KV): rated phase voltage × 0.15-0.65; Kai control voltage lockout (KV): rated phase voltage × 0.65 or more; when the three-phase simultaneously charged, the latch lift the lights, start electromagnetic locks action. Note: I may live sensor matching supply, if the user-supplied CG Series sensors, output short circuit power supply must meet 220uA ± 10%. ▲ simulate the temperature and humidity control functions: with a 1-2 road temperature and humidity control, when the humidity ≥85% RH is to start heating; humidity ≤75% RH, the exit heating. When the ambient temperature ≥38 ℃, heating unconditionally withdraw; when the heater burnout alarm lights. ▲ Temperature and humidity digital display and control functions: with a 1-2 road temperature and humidity sensors and output contacts can be displayed on-site temperature and humidity values, and the user can set the heating / dehumidification output upper and lower limits according to their needs, when the ambient temperature ≥30 ℃ time. Unconditionally withdraw heating, prevent overheating damage. ▲ contacts, cable connectors take the temperature measurement functions: measurement of the contact line, cable lap joints temperature range: -20 ℃ to 125 ℃, accuracy of ± 2 ℃. ▲ body sensing probe: When someone standing cabinet to stay in front, automatic start cabinet lighting, LCD backlight, power transmission with voice prompts, after the operator leaves, stops automatically. ▲ communication function (this function is optional): RS485 interface has remote communications capabilities.