SIMCO ion wind wand 5635

About 5635 type MP ion wind wand, is used in the semiconductor manufacturing engineering apex micro granule 100nm or less in addition to static. Features:? Risk of heavy metal pollution in the world unparalleled advantages of using an electrode material monocrystalline silicon, avoid ultra granule properties of the electrode material. ? The unique MP (pulse modulation), can effectively play the ions except electrical properties. ? Balance potential, even from a distance of 100mm can also be used in electrostatic characteristics and stem length and ion balance is good. ? Through intelligent control circuit, automatic management of ions and ion balance status. ? 1/4 turn replace the electrode can be removed to help reduce maintenance time. ? Characteristics of the potential volatility of MP small way, simplifying the assembly. The potential volatility of small ion balance can be maintained within the reference management. ? In addition to static rod length is set before the process for semiconductor EFEM use. ? Built-in 24V DC drive controller's compact design. ? It can be used for high-level global network. Product Specifications Input Voltage 24V DC + / -10% output voltage adjustment up to a distance of about 100 mm 13.5kv PP installation? 1000 mm (without air purification) plasma generation mode corona discharge method PM (pulse modulation) mode change frequency 1 ~ 33 Hz ion balance automatic balance adjustment method <+/- 10V and down within the ion wind wand will vary depending on the location of <+/- 10v (600 mm distance) electrode monocrystalline silicon electrode can replace blowing clean dry air or nitrogen maximum air pressure 310Kpa ozone production <0.05PPM (24 when GDP) IO alarm signal output electrode output size high 78mm * wide 34mm * t long (see below value) 450/600/850/1000/1150/1300/1450 / 1600/1750 / 1900/2050/2200 / 2350Mm appearance of ABS resin