Japan OHM Electrical and Electronic cooler - Simple refrigerator Kit OCE-KT3-OP1

Japan OHM Electrical and Electronic cooler - Simple refrigerator Kit OCE-KT3-OP1 Peltier assembly kit OCE-KT3 of optional features: the use of the cooling effect of the Peltier cooling effect can be achieved actual packages. Styrofoam built with two 500ml plastic bottles. Not decided assembly kit installation location, installed at the top and the sides are. With a panel cut end of paper, once loaded into. Bitter cold beverage products Tibetan effect is good, you can try a variety of refrigerated products. Other options: water cooling kit OCE-KT3-OP2 thermal grease GR746 certified: Model and specifications OCE-KT3-OP1 set pieces of polystyrene foam fins * 1 * 1 * 2 mounting screw nut * 4 panel cut by the end of paper * 3 * This option does not include Peltier assembly kit (OCE-KT3) Dimensions: Arrive temperature characteristic view of the assembled sequence: 1. OCE-KT3 gasket into the nut, cooling panel fixed on the attached heat sink. Remove the four pads, into a subsidiary of a subsidiary of the spiral fins on the cooling panel with two screws fastening the subsidiary. 2. In the box above the punch, made the first step in the assembly in the inside. Open the attached panel cut into the box on top of the base paper, knife drilling. * According to like it, change the opening position. Cooler fins * Please note inserted into the hole without the cooler holder, if too large open hole, the cooler not get fixed. 3. Plug in and confirm the operation status. [Operation Confirm] into the power, make sure that the cooling effect of the heat sink. Inside the empty state is maintained for about one hour, the inside temperature drops below 10 degrees. Box to be accommodating two 500ml plastic bottle size. Please be sure to read the note before using manual, and used properly. Do not to occur or full of inflammable gas, gas and damage the insulation saprophagous place objects. Do it for the local vibration and shock. Please do not use the power adapter accessory away. Before assembly is completed, please do not plug in the power, electrical shock may occur. Not be used outdoors. This product is not guaranteed. Time of purchase, please make sure that good, such as damaged packaging may cause a malfunction, packaging damaged, please contact the manufacturer.