Cui supply automotive sheet metal automotive sealing glass plastic sealant

Polyurethane sealant performance parameters Model A8 elongation at break of ≧ 400 Appearance Black paste Shear strength Mpa ≧ 6.0 dry time min 15 ~ 30 Tear strength N / mm ≧ 20 curing speed mm / 24h ≧ 3 sag mm 0 Density g / cm3 ~ 1.18 ℃ -45 ℃ low temperature properties without breaking hardness HA ≧ 45 Proposed construction temperature ℃ 10 ~ 40 ℃ Tensile strength Mpa ≧ 8.0 service temperature ℃ -45 ~ 90 ℃ Product Features 1, one-component, thixotropic good, easy construction; 2, high flexibility, strong bonding; 3, water, oil, anti-aging; 4, no solvent, no volume shrinkage after curing; 5, the surface can be sprayed. Usage: windshield, side windows, direct assembly of automotive sheet metal and other high-strength structural bonding. Construction Notice: 1. Please carefully view the logo sealant product before use. 2. Maintain the joint surface clean, dry and remove all grease and dust. 3. The need to use a cleaning of the companies supporting the activator treatment or an appropriate primer coat. 4, coated with a manual or pneumatic gun construction, the bonding rapidly in dry time. 5, at a temperature of 10-40 ℃, RH construction best at 65% -75% of the environment. 6, uncured A8 available cleaners removed from tools or equipment. Once cured the material can only be removed mechanically. Hands and exposed skin immediately after glue adhesive with a suitable industrial hand soap and water to wash, do not use solvents. Packaging storage: 310ml aluminum tube, 400ml soft pack, 600ml soft pack, 250kg drums. Below 25 ℃ dry environment and storing a period 9 months, drum, flexible six months.