Car sealant, "Cui" brand CS-A5T polyurethane sealant

"Cui" brand CS-A5T polyurethane sealant is a high performance, flexibility after curing, sealing the one-component polyurethane adhesive, which reacts with atmospheric air temperature cures to form a permanent elasticity substances. Is a high-strength structural sealant, widely used in glass curtain wall, car windshields, car air conditioning, auto body, machinery, container and other weld seams sealing, bonding and automotive sheet metal skeleton, airport runways tell Highway seams sealed. Performance parameters Model CS-A6 elongation at break (%) ≧ 400 chemical basis of one-component polyurethane shear strength (Mpa) 1.6 appearance of white, black paste tear strength (N / mm) 10.0 Dry time (min) 35-80 sag (mm) 0 curing speed (mm / 24h) ≧ 3 low temperature properties (℃) -45 ℃ no fracture density (g / cm) 1.2 ± 0.5 Proposed construction temperature (℃) 10 ~ 40 ℃ Hardness (HA ) ≧ 28 Service Temperature (℃) -40 ~ 150 ℃ Tensile Strength (N / mm) 6.0 Features 1, one-component, thixotropic, easy construction; 2, high strength, high flexibility, strong bonding; 3, water, oil, anti-aging; 4, no solvent, no volume shrinkage after curing; 5, the surface can be sprayed. Applications: 1, glass walls, car windshields, car air conditioning, auto body, machinery, container and other weld seams sealing, bonding and automotive sheet metal skeleton, runways tell highway joint seals. 2, building waterproof, dustproof seal. 3, other high strength adhesive seal. 4, aluminum, zinc, steel, glass and glass-ceramic composite bonding. Construction Notice: 1. Please carefully view the logo sealant product before use. 2. Maintain the joint surface clean, dry and remove all grease and dust. 3. The need to use a cleaning of the companies supporting the activator treatment or an appropriate primer coat. 4, coated with a manual or pneumatic gun construction, the bonding rapidly in dry time. 5, at a temperature of 5-40 ℃, RH construction best at 65% -75% of the environment. 6. Uncured CS-A5 available cleaners removed from tools or equipment. Once cured the material can only be removed mechanically. Hands and exposed skin immediately after glue adhesive with a suitable industrial hand soap and water to wash, do not use solvents. Packaging storage: 310ml aluminum tube, 400ml soft pack, 600ml soft pack. Below 25 ℃ dry environment and storing a period 9 months, flexible six months.