Architectural glass film of the process

 Building energy efficiency is an important part of the national energy strategy. To achieve the "Eleventh Five" development plan proposed strategic goal of saving 20%, EEB bear the brunt. An important part of building energy efficiency is the opening portion of the wall insulation. entrance doors of homes heat loss is several times or even ten times the developed countries. architectural glass film process involves cleaning glass, window film installation, break film transformation treatment water damage, check the quality of the transfer and so clean. Architectural glass film of the process: 1. Removing Film Location tear protective film glass film, will be installed in the rubber surface was sprayed and clean the glass surface mount exposed to install the glass membrane attached to the adhesive surface on the glass surface, and move very carefully float glass film. 2. Wipe the glass membrane and bubble float moved position, it should immediately install the glass spray liquid film surface again, then wipe with a soft scraping stereotypes, a clean tear of the protective film attached to the glass surface of the membrane installation spray again liquid, the surface smooth, with a professional tool to bubble and install wiper fluid film between the glass excluded, then forced to cross a continuous wiper, wiper over the glass preferably lateral, top-down cross beneath the wiper or wipe from the middle to the edges. Site Keywords: architectural glass film article address: http: //www.lfslm.com/gsxw/933.html