Portable air-fuel ratio analyzer MEXA-730λ

Portable air-fuel ratio analyzer MEXA-730λ to achieve the ideal state of an automobile engine combustion and purification of automobile exhaust air-fuel ratio necessary testing equipment. The device is the combination of HORIBA latest air-fuel ratio detection technology. HORIBA fuel ratio detection technology with the world's leader in automotive exhaust analysis, the world has a large number of users. About 80ms response speed, wide measurement range, compact design (volume and weight are only 1/3 of the original), is an automobile engine research, real-time testing and other areas is very convenient, portable air-fuel ratio analyzer It can be air-fuel ratio, λ, while the oxygen concentration measurement engine, a piece of equipment to meet a variety of purposes. Purpose? Engine development? Engine tuning? Engine tuning? Car test? Car experiment? ECU experimental features? Fast response response time of only about 80ms. Wide range for a variety of engines, including lean-burn engines. ? Precision UEGO sensor factory each sensor be checked to ensure accuracy. ? Compact design volume (130 × 170 × 75mm), weight (body about 1.1kg) are only 1/3 of the original.? Strong versatility not only automotive, but also multi-channel combinations and install a 19-inch rack in. Specifications Response time: 80ms standard (maximum 150 ms) digital input and output: RS-232C (standard) analog output: 0 ~ 5V DC (can be adjusted) H / C Setting range: 0.00 to 99.9 (can be key election) O / C Setting range: 0.000 to 6.811 (can be key to the election) standard gas: ambient air or standard gas cylinder vibration: 0 ~ 294m / s2 Power: DC10 ~ 30V, 50W Dimensions: 130 (W) x170 (thick) x75 (H) mm Weight: about 1.1kg (control unit) UEGO sensor Technical Specifications: Sample temperature: -7 ~ 900 ℃ heater temperature control: PID control 60 cents on the side Size: 22mm tightening torque:? 40 ± 4N m standard accessories UEGO sensor 1, the sensor cable (10m) 1 根, DC power cord 1, a wire recorder Options: AC power adapter, dual cabinet kit (with AC adapter), the sensor cable (5m, 20m) , calibration equipment, sensor fixing nut fastening bolts, RS-232C cable