LM-2: Digital air-fuel ratio tester

LM-2: Digital air-fuel ratio tester Features: LM-2 integrated air-fuel ratio tester, fully functional 32-channel data recording meter and powerful software, you can achieve the minimal cost function of the entire test workshop. Whether your hands are back style fuel controllers, racing fuel carburetor, aftermarket ECU, ODB-II tuning software, or a flash / chip programmer, to be adjusted at maximum horsepower, LM-2 is exactly what you need tool. LM-2 air-testing the digital signal processing technology to accurately measure the concentration of the engine at any load. LM-2 self-calibration circuitry can compensate for the effects due to changes in temperature, altitude, sensor status caused. Exclusive: "Direct Digital" multi-band multi-frequency technology, compatible with all types of fuel can choose single or multi-channel version of the OBD-II scan tool - Read / clear DTCs, record CAN OBD-II data for up to 16 channels (included) to (included) large high-contrast LCD Built-speed image converter (direct frequency measurement or optional inductive clamp) 4 fully differential analog LogWorks software through a powerful replay data stored on the SD card directly Input 2 can be configured linear analog output self-locking interface Innovate MTS serial input and output connections via USB PC LM-2 is also equipped with 2 programmable linear analog output can be connected to the analog scale, dyno computer, ECU, back controllers and other devices with analog inputs. Analog Output 1 is suitable for narrowband simulation; analog output 2 is set to 0 volts = 7.35 AFR, 5 volts = 22.39 AFR. LM through the distribution of the programming software, the user can set the analog output. LM-2 in three different sizes: 1. LM-2 Kit-L (single-channel basic configuration): contains the LM-2 tester, Bosch high bandwidth oxygen sensor, 8 ft sensor cable, cigarette lighter power adapter, USB cables, jacks and plugs inside welded, LogWorks software CD, Quick Start Guide. 2, LM-2 Kit-H (Single Channel Advanced Configuration): Contains LM-2 tester, Bosch high-bandwidth oxygen sensor, 8 ft sensor cable, cigarette lighter power adapter, an analog input / output cable, ODB-II / CAN interface cable, SD memory card, USB cable, and plug in the socket welded, LogWorks software CD, Quick Start Guide. It comes with special suitcase! 3, LM-2 Kit-D (dual-channel configuration): Contains LM-2 tester, (2) Bosch high bandwidth oxygen sensor, (2) 8 ft sensor cable, cigarette lighter power adapter, an analog input / output cable, ODB-II / CAN interface cable, SD memory card, USB cable, (2) within a welded jacks and plugs, LogWorks software CD, Quick Start Guide. It comes with special suitcase!