Tianjin, a full set of high-pressure injection pump GZB-40C jet grouting pile factory direct

Our company specializes in producing high-pressure jet grouting pile full set of equipment, jet grouting rig, high-pressure injection pump, low pressure grout pump, dual fluid injection pump, high pressure pump parts, rotary spray rig accessories; the company has a professional construction team, in the actual construction constantly improve our products to make them more suitable for field environments. GZB-40C a high-pressure injection pump, injection pump uses GZB-40C-pressure injection pump high-pressure jet grouting equipment, mainly to provide high-pressure water spray high-pressure mud spin. For the new building, highway, railway, underground railways and other soft ground reinforcement, anti-seepage treatment for around foundation, cofferdam and hydropower dams. Second, the injection pump characteristics GZB-40C-pressure injection pump at GZB-40A is based on the original, GZB-40B on the incremental improvements made. Compared with similar products, which can avoid the roller bearing type transmission Transmission of sudden accidents, power end extend the working life; its bold crank ensures that will never be broken crankshaft happen; reasonable hydraulic end structure, easy removal accessories and durable. It is a very mature application of high pressure mud pumps. Third, the injection pump parameters plunger stroke: 100mm Ratio: 1 = 7.2545 piston strokes per: 169 times the suction pipe diameter: 50mm diameter discharge pipe: 16 ~ 25mm piston diameter: 45,50,55mm output flow: 96, 99,110L / Min rated pressure: 42,40,35Mpa (with 90kw motor) 35,30,28Mpa (with 75kw motor) 25,22,20Mpa (with 55kw motor) Motor type: YCT335-4C motor Maximum speed: 1340r / Min Dimensions: 3050 * 1800 * 1150mm Machine weight: 3000kg crankshaft diameter 130mm, not easy to wear, damage; W type transmission, not damaged, does not affect the field of engineering process; forging ensure the life of the pump head. XPB-20B jet grouting rig hydraulic walking 1, the rig main purposes of this model can be used for all kinds of soft ground reinforcement, high-rise building basement seepage treatment, rivers dam remediation, rail road bridge pier reinforcement. By combining different modules for fixed spray can, put spray, jet grouting and other construction technology; Single, double, triple Churning various construction requirements. 2, the main features of 2.1 rigs, rig adapt good performance, supporting different modules, different drilling projects can meet different needs. Users can configure according to their actual needs to be put in the best cost performance rig construction, and can continue to update the modules to solve different jet grouting process. 2.2, rig some soft soil at the construction, drilling and jet grouting can be completed. 2.3 rig with full hydraulic technology: drill head gear, lifting and drilling rig from the tower, all hydraulic controls, flexible operation, maintenance saving time, effort. The new aircraft hydraulic walking system, mobile convenient, greatly improving efficiency. XPB-20B jet grouting anchor rig drilling depth 50M with maximum torque 2800NM walking gait speed speed speed 140r / min maximum lifting force 30KN low speed 55r / min Rated Power 22KW + 1.5KW low speed 0-16r / min 3000Kg weight lifting powerhead Fast 8m / min Slow 0-0.5 m / min Dimensions Packaged length × width × height (mm) 4250 × 2100 × 1750 work status length × width × height (mm) 3600 × 3100 × 4725 SP-30 horizontal rotary jet Horizontal Jet Grouting pile rig is drilling in the horizontal way of a high-pressure jet grouting pressure water slurry, the outer contour of the excavation of the tunnel arch pre-formed liner, advance support construction methods to protect against the tunnel face and surface subsidence. Practice has proved that the level of domestic and foreign jet grouting pile is effective and fast economic tunnel advance support technology, has broad application prospects. The company in a large number of research results on the use of theoretical analysis of jet grouting pile was further improved and the use of a number of technical innovations, according to needs of the construction, production and practical new small horizontal jet grouting pile. First, the scope: Churning Pile, foundation bolt holes, pneumatic DTH hammer drilling and other construction process, strengthening the foundation for urban, rail, highway tunnel construction shed holes, bolt holes, drainage holes. Second, the main features: 1, horizontal rotary spray rig to adapt to performance, rig adopts full hydraulic technology, less wearing parts used in construction, convenient and flexible user operation, maintenance saving time, effort, greatly improve the efficiency of construction. 2, rig some soft soil at the time of construction, drilling and jet grouting can be completed. 3, the wide scope of the rig supporting different modules, different drilling tools can meet different project needs, a multi-purpose machine. 4, rig model small, space is not limited. 5, the rig light as easy to move. Third, the main technical parameters: 1, drilling depth 30 -50m 2, drill diameter φ50, φ60, φ89mm 3, borehole inclination angle of -10 ° ~ 90 ° 4, the maximum output torque of the power head 2300 Nm 5, power head output Speed ??3-35,35-100rpm (stepless) 6, power head maximum pulling force 25 kN 7, the power head pulling speed 5-50000mm / min (stepless) 8, the power head maximum feed force 15 kN 9, head travel 1200,2200mm 10, motor power 11 kW + 3kw 11, host Dimensions (Transport) 3750 × 1000 × 1300 mm or 2400 × 800 × 1300mm optional 12 rig weight 1000kg