Tianjin best-strong track rigs in Tianjin

XPL-50 jet grouting rig type anchoring a rig main purpose of this model can be used for all kinds of soft ground reinforcement, high-rise building basement seepage treatment, rivers dam remediation, rail road bridge pier reinforcement. By combining different modules for fixed spray can, put spray, jet grouting and other construction technology; Single, double, triple Churning various construction requirements. Second, characteristics: 1. equipped with a swivel bracket, you need to go to the track side holes work, improve work efficiency. Accurate rigs vertical, power head rotation speed and lifting speed display device, the rig to bore, accurate and fast. 2. The use of advanced direct-acting hydraulic system load feedback to fine-tune the variable power with the load change, high efficiency, low energy consumption. 3. crawler chassis equipped with large traction, climbing ability, equipment movement easy and fast. The dynamic wide head speed range to meet the needs of various strata and different jet grouting process. 5. Power head stroke length, can be accessed by 3 m drill, reduce the auxiliary time. 6. Using custom localization of imported special valve, which feature fully meet the Jet process requirements. Third, the main technical parameters: 1 Maximum torque: 2000 Nm 2 power head speed: 0 ~ 240r / min 3 Power head stroke: 3500 mm 4 powerhead Rated lifting force: 30 kN 5 powerhead allows you to add pressure: 12 kN 6 drill Hole Depth: 50 m 7 drill pipe diameter: Φ42 mm; Φ50 mm 8 Drilling angle: about ± 3 °; around 0 ~ 100 ° 9 Motor power: 22 kW 10 Dimensions :( work) 2600 × 1800 × 4600 ( transportation) 4600 × 1800 × 1780 (mm) 11 Total weight: 2800 kg 12 System Pressure: 20 MPa 14 Maximum grade: 25 ° 15 walking speed: 2km / h