Supply of quality honeycomb ceramic heater, cellular electric heating plate

Far infrared ceramic heating plate ceramic heating plate element structure: submerged ceramic far-infrared radiation element, the Department of high emissivity glaze layer, good thermal shock resistance of the ceramic as a matrix, high-quality electric wire once sintered, far infrared Their composition ceramic heating plate ceramic heating plate board are as follows: 1. Substrate: thermal shock resistance of a ceramic material; 2. heat resistance: firing from high-quality nickel-chromium alloy wire made of; 3. glaze: from far outside the radiation properties of metal oxide materials composed of good and put the right amount of additives to improve the radiation intensity increased glaze fit far infrared ceramic heating plate ceramic heating plate 1. The radiation characteristics: the highest rate of monochromatic radiation element 0.9, normal total radiation rate is greater than 0.83. 2. Thermal response time: from room temperature to a constant value radiant panel surface temperature no longer than 20 minutes. 3. The cross-resistance to thermal denaturation: no peeling after five alternating hot and cold test, no cracking. The radiating temperature unevenness: ≤15% 5. Power error: the rated working voltage ≤5% 6. Cold insulation resistance: 500V megger> 2mΩ 7. hot insulation resistance: 500V megger> 0.5mΩ 8. life> 4000 hours. Embedded ceramic far-infrared radiation element (far-infrared ceramic heating plate ceramic heating plate), based on the guidelines of international advanced technology, combined with years of research, the results obtained. With high technological content, good overall performance, clean, easy assembly, acid, corrosion resistance, safety, long service life. Ceramic heating plates can be used in vacuum forming, baking food, health and other types of drying and baking infrared curing and other occasions, with the ideal energy-saving effect in the electronic textile, light industry, mechanical and electrical chemical, medical, food and other industries with obvious social and economic benefits. I can give special processing plant in accordance with the special requirements of users. Energy Saving (ceramic) improved cellular heater has the following characteristics: 1, based on the theoretical analysis of this product by using FLUENT software, different glass heater high aspect ratio data by computer simulation study, the highest baking temperature analysis The structure, 25% of energy-saving products. 2, in order to improve the yield and prolong the service life of energy-saving heater designed "to fit a ceramic far-red" structure and corresponding molds and products, products used in plastic machinery, drying machinery. 3, to provide energy-saving heater thermal denaturation laser structure to withstand rapid temperature changes, and can meet the minor impact plastic machine mechanical strength, the need for energy-saving heater 蓳 bluestone and other materials used to adjust the formula and preferably, then carried out several rounds of experiments ray wavelength 100μm to 400μm. 4, solve the multi-layer insulation layer and UV quartz material instead of flat cold mirror its problems and improve the section of the heater thermal performance and cost. 5. Best Way thermocouple position to meet the whole "one to one" Temperature control requirements, energy-saving heating, good insulation, one year warranty. First, the performance uses: ceramic heater is a high temperature and long life of the heater, modern industry demand for increasingly high operating temperatures, the ceramic heater can adapt, especially chemical fiber, plastics, plastics machinery, electronics, medicine, food and a variety of heating pipes; ceramic joints by a spiral resistance heater wire through a specially designed high temperature ceramic tile, precision extension constitute, flexible, beautiful metal ceramic fiber insulation. An effective high temperature, high power density, with a heater, and design flexibility for easy installation. Second, the technical characteristics: ceramic heater has a ring and a plate-type and other specifications, reliable long life, durability, energy conservation, with the installation flexible, high temperature, heat and fast, good insulation, production models and specifications without size restrictions and so on. According to user needs wiring, the voltage from 36V, 110V, 180V, 220V, 380V, maximum power load per square 6.5W, compared with the conventional heater energy consumption can be reduced by 30% .. Third, the use of high-temperature ceramic heater Note 1. Non-waterproof structure, storage and installation Do not use with oil, water, plastic pellets contact to prevent leakage. The high-temperature ceramic heater must be heated and close fitting 2. When installing, heat the surface should be flat to full, no uneven phenomenon. 3. High-temperature ceramic heater after use found the charred surface like the color, it indicates that fever and heat dissipating unbalanced, should be timely adjusted to prevent burn. 4. When using a high-temperature ceramic heater heating should avoid strong shock or collision with hard objects caused by tile break, the exposed alloy resistance wire affect the operating life. 5. Check the installation location and installation should be preceded by high-temperature ceramic heater specifications are consistent with the use of voltage are the same.