Injection molding machine energy-saving electric heaters ceramic electric lap steel ring

High electric materials relevant requirements of electric wire degree heat; material no impurities, not segregation, strong antioxidant capacity; in use, no distortion, no breakdown, no loopholes phenomenon. (2) the relevant requirements of refractory insulation material is 95 alumina ceramic, in the course of work, there is high temperature strength and high temperature insulation capability, not broken, no leakage, high thermal conductivity, thermal shock stability, and high temperature strength, wear resistance, anti-oxidation. (4) The production process off electric wire winding process, no cracks, the installation process is not keeping clean ceramic defect. After a lot of customers after use proven, at normal operating temperature and load, factory production of ceramic heating by the public recognition and acclaim. Ceramic heating are the following advantages 1, heat and fast, even heating, stable. 2, the temperature is not compromised, can save energy, do not touch hot housing, work safety. 3, high power, ceramic, wear silk way than ordinary power to 0.5 to 1.5 times 4, KANTHAL high temperature alloy wire, and the use of CNC technology around the system, to ensure the accuracy resistance, voltage, power, temperature, with cooling fast, even heating, high temperature stability characteristics, can be prolonged use at 600-800 ℃. 5, long product life, as raw materials aging more slowly so long product life at high temperatures. 6, in line with the state GB the technical requirements. Power Tolerance + 5% ∽-10%. 7, the electrical strength: The voltage 1500v / 50Hz sinusoidal AC voltage test, no breakdown by 1MIN. Use and maintenance of a product, the use of (1) must be high-temperature ceramic heater with the heated body close fit, complete heating surface should be flat, no uneven phenomenon installation. (2) high-temperature ceramic heaters after use is found in the charred surface like the color, it indicates that fever and heat dissipating unbalanced, should be timely adjusted to prevent burn. (3) When using high-temperature ceramic heater heating should avoid strong shock or collision with hard objects caused by tile break, the exposed alloy resistance wire affect the operating life. (4) Installation should be preceded by checking the installation position is consistent with the high temperature ceramic heater specifications, the use of voltage are the same. High temperature ceramic heater Non-waterproof structure, storage and use when installed do not contact with oil, water, plastic pellets, in order to prevent leakage. Second, the maintenance (1) of the outgoing prone to oxidation clips bolt loose, should be regularly checked and tightened. (2) When removing the terminal should be careful not to hit and knock terminals; (3) Note that the positive and negative mark heater core, three to four months a positive and negative exchange;. (4). After three to four months, you should clean the dust;