YW-type liquid under non-clogging sewage pump

■ YW-type liquid under non-clogging sewage pump Product Overview: YW-type liquid without clogging sewage pump is resistant valve in accordance with the actual requirements of the user and installation conditions, in different ways, with the factory many years of practical experience in the WQ type diving sewage pump on the basis of rational optimization of designed, this series of products with easy installation, reasonable structure, while also avoiding the mechanical seal leakage caused by motor burned ills. ■ Under YW-type liquid non-clogging sewage pump Model significance: ■ Under YW-type liquid non-clogging sewage pump Features: 1. YW-type liquid under non-clogging sewage pump uses a unique monolithic or double blade impeller structure, greatly improving the dirt capacity, which can handle fiber material 5 times of pump diameter of about 50% of the pump diameter of solid particles. 2. Mechanical seal uses latest anticorrosive hard tungsten titanium material to enable safe more than 8000 hours of continuous operation. 3. Compact structure, small size, low noise, energy-saving effect is remarkable, easy maintenance, no need to build pumping stations, dive into the water to work, greatly reducing the project cost. 4, under the YW-type liquid non-clogging sewage pump compact structure, small size, easy to move, easy to install. 5, can be equipped with automatic level control cabinet, according to the required level changes, automatic control of pump start and stop, without special care, extremely easy to use. 6, under the YW type liquid non-clogging sewage pump for the vertical structure, while working pump immersed in the liquid and therefore very easy to start, there is no exhaust evacuation problems, but with no leakage, etc., liquid depth of up to seven meters. 7, advanced and reliable access shaft structure, pump and motor with coupling coupling, shaft size precision, to ensure the smooth operation of the pump, with sufficient safety factor. 8, a single pipe installation pump in two and two-pipe, the support member has a disk and Fangpan wear, suitable for different needs. ■ YW-type liquid under non-clogging sewage pump Conditions: A, pump ambient temperature ≤40 ℃, humidity ≤95%; Altitude ≤1000 meters, more than should be raised in order. B, medium temperature does not exceed 60 ℃, medium gravity of 1 ~ 1.3kg / dm3. C, cast iron range is PH5 ~ 9. D, 1Cr18Ni9Ti stainless steel can be used in general corrosive media. E, use of the environment is not more than 1000 meters above sea level, more than should be raised in order to provide you with more reliable products. NOTE: If you have special user temperature, media, etc., please specify when ordering details of the transmission medium to the unit to provide a more reliable product.