KCB series gear pump

I plant the use of KCB gear pump for conveying solid particles and fibers, non-corrosive, temperature no higher than 350 ℃, viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) of oil or other liquid lubricant of similar nature. Stainless steel, copper, plastic and other materials can transport corrosive, flammable and other media. ● Applications can be used in the oil transfer system, booster pump; can be used in the fuel system, transmission, compression, fuel injection pump; In all industrial areas, can be used as a lubricating oil pump. In the shipbuilding industry, it can be used as lubricating oil pumps, fuel pumps, sewage pumps ● structural features This series of gear pumps are gear, shaft, pump, valve, shaft seal formed. Gear heat treatment with high hardness and strength, and the shaft is installed with operating in a replaceable bushings. All parts of the pump are lubricated by the output medium when the pump work automatically to. There are well-designed pump drain and return tank, the gear to withstand the torque force at work a minimum, thus bearing loads of small abrasion, high pump efficiency. Pump has a safety valve as overload protection, safety valve total reflux exclude pressure pump rated pressure of 1.5 times, it can also be discharged adjusted according to actual needs additional pressure range allowed. But note that the safety valve relief valve can not be long-term work, when necessary, be installed in the pipeline. Overhang from the spindle end of the pump to see, for the clockwise rotation. Pump can be installed vertically. Order Hotline: 0317-8292122,8189553 Fax: 0317-8188192